User Manual

3 Operating the appliance

3.8 Selecting additional functions

▸ Press the button for the desired programme once or more.

If the programme needs to be changed, it is possible to select a new pro-

gramme within 20 seconds. Additional functions must also be reselected. If

no button is pressed within the next 20seconds, the programme selected

starts automatically.

3.9 Delayed start

Selecting programme end time

The options «Programme end time» and «OptiTime OFF» must be enabled in the user set-

tings under «Programming delayed start / OptiTime».

▸ Press the button for the desired programme once or more.

▸ Press the button repeatedly until the desired programme end time appears

in the display.

The display goes dark. The desired programme starts automatically when

the set time is reached.

▸ To reduce the remaining time delay in hourly intervals, press the button re-

peatedly again.

Laundry can be added at any time.

Selecting programme start time

The option «Programme start time» must be enabled in the user settings under «Program-

ming delayed start».

▸ Carry out steps analogous to those described in «Selecting programme end time».