7"/19" LCD Monitor User Manual ENGLISH SVENSKA 简体中文 FRANÇAIS DANSK 繁體中文 DEUTSCH PORTUQUÊS 한국어 ESPAÑOL NORSK ITALIANO SUOMI NEDERLANDS РУССКИЙ POLSKI 日本語
PRECAUTIONS Information for users applicable in European Union countries Information for users applicable in United States of America Installation Power connection Maintenance Transporting the monitor GETTING STARTED Package contents Monitor installation Identifying parts and controls Working with OSD Group Customizing your Monitor Introduction to Hotkeys The operation of Function menu OSD icon list 1 1 1 1 1 1 2 2 3 3 3 4 4 5 Troubleshooting 6 Technical Features and Specifications 7 7 Interface Fr
PRECAUTIONS 5.Disconnect the power cable from the power supply if: 5.1 You will not use the monitor for an extended period. 5.2 The cable is damaged or frayed. 5.3 The monitor has been dropped or the cabinet damaged. 5.4 A distinct change in performance indicates a need for servicing. Information for users applicable in European Union countries The symbol on the product or its packaging signifies that this product has to be disposed separately from ordinary household wastes at its end of life.
GETTING STARTED Package contents Monitor installation 1.Setting up the monitor 1.1 Take out the monitor, stand and monitor base from the package. 1.2 Place the monitor base on the desk and then slide the neck into the slots of base. (Make sure the direction of the neck is correct.) 1.3 Grasp the monitor with both hands and then slide the monitor into the neck. (Make sure the direction of the neck is correct) Before beginning, ensure that the carton contains the following items: 1. LCD Monitor 2.
Customizing your Monitor Identifying parts and controls The On Screen Display (OSD) system provides a full range of customizable tools to optimize your display. 1.The LED light indicates the state of working. During operation, the LED Light is bright green. When dormant, the LED Light is orange. 2.The power button is used to identify the state of power. You can use the power button to control on & off. 3.The function keys are used for adjusting all settings.
< 5. Return to the higher level menu. Press to return to the higher level. 6. Exit: Press E to exit OSD menu; Or if you do not press any button, it will automatically disappear after 30 seconds. Hotkeys Introduction 1.Auto Adjustment When the OSD functions are displayed, press the first button on the left , and then you can automatically optimize the image performance. 2.
OSD Icon List AUTO ADJUSTMENT * Optimize the picture performance automatically. THEME MODE * Activate the built-in color engine to enhance the graphic effects according to the different situations of the display. contents BRIGHTNESS * Adjust the luminance level of the screen. CONTRAST INPUT SIGNAL SELECT OSD MENU LANGUAGE COLOR TEMPERATURE SYSTEM SYSTEM FULLSCREEN NATIVE SCREEN WHITE BALANCE * Adjust the contrast level of the screen.
Troubleshooting Symptom Check Items 1.No picture 2.LED indicator is not lit. 1. Check if the monitor is turned on (press the button again). 2. Check if the power cord is properly connected to the monitor and power outlet. 3 .Check if there is electricity coming from the power outlet (use another device to check for power). 1.No picture 2.LED indicator is orange 1 Check if your computer is turned on.
Technical Features and Specifications Item Description Display Size Panel Pixel Pitch Connector Tilt 337.9(H)x270.3(V)mm period but not match the frequency of supported timing, display optimization would not be 19" 0.294(H)x0.294(V)mm assured. If the entered mode is out of the working period, the display will be blanking 17" 0.264(H)x0.264(V)mm (just show “INPUT SIGNAL OUT OF RANGE”) then go to power saving.
Addendum FCC compliance 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
