Operation Manual

ManualsBrandsV7 videoseven ManualsMonitorLED236W3

Content

F.C.C STATEMENT

IMPORTANT SAFEGUARDS

1.Introduction .............................................................................................. 1

1.1 Features ........................................................................................... 1

1.2 Checking List .................................................................................... 1

2. Installation ............................................................................................... 2

2.1 Install the pedestal ........................................................................... 2

2.2 Connect your monitor to computer ................................................... 2

3. Front Panel overview ............................................................................. 3

4. Access Features ..................................................................................... 4

4.1 Switching the Monitor On/Off ........................................................... 4

4.2 Power Indicator ................................................................................ 4

4.3 Menu Features ................................................................................. 4

4.4 OSD Functional Control Description ................................................ 5

4.5 Preset Modes Timing Chart .............................................................. 7

4.6 Plug and Play ................................................................................... 8

5.Technical Information ............................................................................. 9

5.1 D-SUB Signal connector pin assignment ......................................... 9

5.2 Visual Inspection ............................................................................ 10

5.3 Trouble shooting ............................................................................. 11

www.V7-world.com

Summary of content (15 pages)

PAGE 1
Content F.C.C STATEMENT IMPORTANT SAFEGUARDS 1.Introduction .............................................................................................. 1 1.1 Features ........................................................................................... 1 1.2 Checking List .................................................................................... 1 2. Installation ............................................................................................... 2 2.1 Install the pedestal ....
PAGE 2
F.C.C STATEMENT FEDERAL COMMUNICATIONS COMMISSION This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
IMPORTANT SAFEGUARDS Warnings: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read all of these instructions Save these instructions for later use, please. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards. Do not use this monitor near water.
PAGE 4
15. 16. 17. 18. 19. covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Unplug this monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the monitor. c. If the monitor has been exposed to rain or water. d. If the monitor does not operate normally by following the operating instructions.
PAGE 5
1. Introduction 1.1 Features  Microprocessor based with OSD (On Screen Display) control.  Compatible with standard IBM VGA, extended VGA, super VGA, IBM XGA, SXGA modes, as well as VESA resolution standards.  Universal power supply 100-240 Vac, 50/60Hz(Power box)/DC 12V(Monitor)  Microsoft Windows 95/98/2000/XP/VISTA compatible & VESA Display Data channel (DDC)1/2B compatible 1.
PAGE 6
2. Installation 2.1 Install the Pedestal To attach the base to your monitor, please follow the steps for installation of the pedestal as below: 2.2 Connect your monitor to computer 1. Turn off the computer and unplug the power cable. 2. Connect the signal cable to the signal port on the back of the computer. 3. Connect the DC plug of the AC-DC adapter to the DC 12V port at the rear of the monitor. Connect the power cord to the AC-DC adapter and wall outlet. 4.
PAGE 7
3. Front Panel Overview 1、Menu Button To push menu button turns on the menu, and it activates the items you highlight. 2、Select Button(▲UP/▼DONW) To choose which function you need. You may choose DOWN counterclockwise or UP clockwise. 3、Auto Button Auto adjusts the display mode to its utmost performance according to VGA setting. 4、Power Button( ) Use this button to turn the monitor on and off.
PAGE 8
4. Access Features 4.1 SWITCHING THE MONITOR ON/OFF This power button is used for switching the monitor on and off. Note: The power button does not disconnect the device from the mains voltage. To completely disconnect the mains voltage. Please remove the power plug from the socket. 4.2 POWER INDICATOR This indicator lights up green or blue when the monitor operates normally. If the monitor is in power saving mode, this indicator change to orange.
PAGE 9
4.4 OSD Functional Control Description 1. Main Menu OSD main menu of controls gives you an overview of the selection of controls available. When you want to make adjustment of the screen image, press and release button Menu 2. OSD Adjustment You can choose where you would like OSD image to appear on your screen. H-Position : To move the OSD image horizontally left or right. V-Position : To move the OSD image vertically up or down. Exit : or To exit the sub menu 3.
PAGE 10
6. Color Select Color Select Menu Select user mode User color you can adjust to individual color gum intensity by yourself. Increase or decrease red, green or blue depending upon which color is selected. Cool: This control adjusts the color temperature of the screen image. This item are preset by factory, you can not adjust these setting. The performance is bluer and brighter. Warm: The performance is redder and closer to paper white. Native: to give the white color a natural tint.
PAGE 11
4.5 Preset Modes Timing Chart The screen image has been optimized during manufacture for the display modes listed below. 1. Aspect ratio 16:10 Item Dot X Line Refresh rate(Hz) 1 720 x 400 70 2 640 x 480 60, 75 3 800 x 600 60, 75 4 1024 x 768 60, 75 5 1280 x 1024 60, 75 6 1440 x 900 60 7 1680 x 1050 60 8 1920 x 1200 60 NOTE: All preset modes are subject to change without notice. 19"w: Items 1~6; 20"w, 22"w: Items 1~7; 24"w, 26"w: Items 1~6, 8; 2.
PAGE 12
4.6 Plug and Play This monitor features the VESA DDC (Display Data Channel) standard, which when used with a DDC compatible video card, will simplify the monitor's set up. With VESA DDC 1/2B, when the monitor is powered up, it will automatically notify a windows 9X/2000/XP host computer of its scanning frequencies, capabilities and characteristics. Windows 9X/2000/XP will automatically recognize the connection of the monitor and select the appropriate display resolution.
PAGE 13
5. Technical Information 5.1 D-SUB Signal connector pin assignment PIN 1 2 3 4 5 6 7 8 Signal (D-sub) Red Green Blue Ground Self Test Red Ground Green Ground Blue Ground PIN 9 10 11 12 13 14 15 Signal (D-sub) 5 VDC Ground Ground SDA (For DDC) H. Sync. V. Sync.
PAGE 14
5.2 Visual Inspection Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely faultfree screen display. A few isolated constant lit or unlit pixels may be present. The maximum permitted number of pixels faults is stipulated in the stringent international standard ISO-9241-302 (Class II). Example: a 17" flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels.
PAGE 15
5.3 Trouble Shooting Before calling for service, check the information in this section to see if you can remedy any problems by yourself. If you need assistance, please call the dealer where you purchased the LED monitor. There is no SCREEN image Please check these items:     The power cord is securely connected the monitor, the adaptor, and the wall outlet. Check the signal cable connection between the monitor and the computer. Adjust the brightness and contrast controls.