Quick Start Guide

ManualsBrandsV7 videoseven ManualsVehicleNAV 730

Function keys and I/O interfaces:

Ref Component Description

1) SD/MMC Slot Accepts an optional SD (Secure Digital) or MMC (MultiMedia Card) card for removable storage.

2) Volume key Turns the volume up/down.

3) Battery Charge

Indicator

The loading display will shine red during the charging process. It will shine green when the

accumulator is completely charged.

4) Touch Screen Displays the output of your appliance. Tap on the screen with your finger to select menu commands

or enter data.

6) Main switch/

Battery button

Separates the device from the battery completely (also Hard Reset).

7) Reset button

Restarts your appliance. (Reset).

8) Headphone

connector

Connects to stereo headphones.

5) On/Off Button Turns the device on or off.

9) Mini-USB-

Connector

Connection for connecting to a PC by means of the USB cable.

10) Loudspeaker Plays back music, language statements and warnings.

GPS NAVIGATION NAV730

Quick Start Guide

Summary of content (5 pages)

PAGE 1
GPS NAVIGATION NAV730 Quick Start Guide Function keys and I/O interfaces: Ref Component Description 1) SD/MMC Slot 2) Volume key 3) Battery Charge Indicator Accepts an optional SD (Secure Digital) or MMC (MultiMedia Card) card for removable storage. Turns the volume up/down. The loading display will shine red during the charging process. It will shine green when the accumulator is completely charged. 4) Touch Screen Displays the output of your appliance.
PAGE 2
Initial Set up: 1.Switching on the navigation system Remove the protective plastic from the screen and ensure the main power switch on the right side of the unit is in the ON position. ! Attention: Always leave the main switch in the ON position. The switch should only be set in the OFF position to preserve battery charge if the unit is to be stored for an extended period of time. Note:Some settings will be reset. 2.
PAGE 3
Initial setup Languages Set Date Set Time Mainpage V7 Navigation The Map When the V7 Navigation first starts, the Map screen appears. From here you can reach all three tabs of the V7 Navigation menu by tapping the button. On the tab, you can specify your destination as an Address, a POI (Point of Interest), or by its GPS Coordinates. You may also select a destination from Favourites, or one of your recently visited destinations from the History list.. Tap to edit or cancel your route.
PAGE 4
Find a POI (Point of Interest) To select a POI, open the Find & Go menu and tap to view the list of POI groups. From this list you can: Tap a POI group to open a list of subcategories. to search POIs by name. Tap For a complete list of POIs near your reference location, tap Use the . buttons to see additional POI groups. To find POIs around a different reference location, tap . A list of POIs will be displayed. Tap to narrow the list by entering a part of the POI name.
PAGE 5
The map screen The V7 Navigation has a map screen for both map browsing and navigation. The map looks like a conventional road-map. The blue arrow represents your current position, and the green line shows the recommended route. If there is an active route, the three data fields at the bottom will display time, distance and other route information. Also, the turn preview in the top left corner will display the type and distance of the next manoeuvre. Use the and buttons to zoom in or zoom out.