20" LCD TV User's Manual Notices： 1 Please read this manual cautiously and completely before operating your LCD TV. 2 Please kindly reserve this user's manual because you may need it in the near future. 3 Please record the LCD TV's model number and serial numbers in the following blanks. * You can find the model No. on the label attached on the back of the LCD TV and quote this information to your dealer when you require service.
Important Safety Instructions 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Contents Important Safety Instructions I. Introduction 1-1 Before Use 1-2 Specifications 1-3 Package Contents 1-4 Installation 1-5 Front panel controls 1-6 Back panel connections 1-7 Remote control 1-7-1 Inserting batteries and effective range of the remote 1-7-2 Remote Control Button Description 01 01 02 03 04 05 07 07 07 II. Equipment Connections and Setup 2-1 Power Connection 2-2 Connecting with Headphone 2-3 Antenna Connections 2-4 Connecting Other Components 11 11 12 13 III.
20" LCD TV User's Manual 1 Introduction 1-1 Before Use Please you go through our brief specification as below to get a understanding about our LCD TV basic feature and connectivity before you use our LCD TV to watch TV or other video source. When you skimmed through this page, I think it will bring you to know about our product specification and if you want to know more about how to adjust our TV and how to link up which equipment can completely maximize our LCD TV's performance.
20" LCD TV User's Manual Dimensional Overview 94.6 mm 307 mm 409 mm 460 mm 118 mm 476.4 mm 1-3 Package Contents Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective padding. When opening the carton, please check the product is in good condition and all standard accessories and items are included.
20" LCD TV User's Manual 1-4 Installation Please read the user manual carefully before performing the installation. The power consumption of the display is approximately 75 watts. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be defeated. The product should be installed on a flat surface to avoid tipping. Space should be maintained between the back of the product and the wall for proper ventilation.
20" LCD TV User's Manual 1-5 Front panel controls POWER / Remote sensor window Standby indicator Button POWER / Remote sensor window Headphone Connector Headphone Description Use this button to switch the LCD-TV between on and standby modes. The power indicator will glow green when the power is on. The power indicator will glow red when the LCD-TV is in standby. The power indicator will not glow if the power cord is unplugged. Color Code Description Green For connecting the earphone.
20" LCD TV User's Manual Button Description MENU Use this button to display and adjust the software-controlled features of this LCD-TV. PROGRAM FUNCTION Use these two buttons to switch between preprogrammed channels. When the OSD MENU was turn ON, use these to switch between functions to adjust. VOLUME ADJUST Use these two buttons to make the sound softer and louder. When the OSD MENU was turn ON, use these to adjust the particular value of a function.
20" LCD TV User's Manual Video Connectors Description Color Code Scart 1 Black Use this connectors to attach the decoder or other audiovisual equipment. Scart 2 Black Use this connectors to attach the VCR recorder or other audiovisual equipment. White S-Video: 1 DIN, 2 RCA jacks. S-Video is superior to Composite Video but not as good as Component. AV: 3 RCA jacks. Use the composite video cable to attach a popular device such as a VCR or game console.
20" LCD TV User's Manual 1-7 Remote control 1-7-1 Inserting batteries and effective range of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are UM-4, AAA, IEC R03 1.5V. Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in a designated disposal area.
20" LCD TV User's Manual The index number corresponds to the callout number for each button depicted in the illustration. TV FUNCTION Index Button 1 Power 2 Mute 3 4 Number Button Pad R (Return) 5 6 7 8 Description Use this button to switch the LCD-TV between on and standby modes. The power indicator will glow green when the power is on. The power indicator will glow red when the LCD-TV is in standby. Use this button to turn the volume off completely.
20" LCD TV User's Manual OSD FUNCTION Index Button Menu 9 / 10 (Volume) 11 P / P (Channel) 12 Source Description Press this button to activate the OSD menu. To exit, press the button again. Press these buttons to Adjust volume up/down. When OSD menu had turned on. These buttons will be became to for OSD to change direction to adjust the value and confirm your selection. Press these buttons to Select channel up/down.When OSD menu had turned on.
20" LCD TV User's Manual ADDITION FUNCTION Index Button 13 14 15 Teletext Colour (Red/Green/ Yellow/Blue) Description Press this button to activate Teletext. Press again to mix Teletext with TV. When the Teletext is turned on. You can select the pages displayed in the coloured brackets at the button of the screen by pressing the corresponding colour (R/G/Y/B) on the remote control. Page Up/Page Down Press these buttons to select next page or previous page.
2 Equipment Connections and Setup 20" LCD TV User's Manual 2-1 Power Connection Plug the power cord into an AC wall socket. [Caution] Turn off your LCD TV and unplug the power cord when not used for a long period of time. Household power outlet 2-2 Connecting with Headphone Plug the headphone mini-plug into the headphone jack location on the right side of the set. NOTE: 1. The headphone is not included in the supplied accessories. 2.
20" LCD TV User's Manual 2-3 Antenna Connections To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of connecting to an antenna with a coaxial cable. VHF Only Or VHF / UHF Or Cable VHF / UHF 75-Ohm Coaxial Cable Rear of TV Antenna cables - commercially available. If your outdoor antenna uses a 75-Ohm coaxial cable with a standard DIN 45325 plug (IEC 169-2), Plug it into the IN terminal at the rear of the TV.
20" LCD TV User's Manual 2-4 Connecting Other Components white white NOTE: The S-Video terminal has priority over the AV terminal, when the "Video" to be connected.
20" LCD TV User's Manual 3 Basic operation and Adjustment 3-1 Turning on your LCD TV & Watching a TV program 1 Press the TV button to turn on the LCD TV. 2 Press the button and select TV source. 3 Press the mode. button and choose OSD to TV 4 Use "Country" to choose your living country.
" LCD TV User's Manual 3-2 Using the On Screen Display (OSD) General end users can directly press the button to switch the input source and know about presently what input source linking up with their sets by the source information indication that appeared on the left top of the screen. After selecting the system mode, you can use OSD menu to adjust your LCD TV and the LCD TV will save your settings, even if you turn off the television.
20" LCD TV User's Manual DISPLAY CONTRAST 18 CONTRAST BRIGHTNESS SHARPNESS COLOR : SELECT RECALL : SELECT : ENTER MENU: EXIT : ADJUST MENU: BACK NOTE: Items in gray cannot be selected and adjusted. 3-2-2 OSD Instruction With a view to assuring our end users' LCD sets working normally and maximize their display performance without any other artificial maladjustment when our end users adjusted our OSD menu.
20" LCD TV User's Manual 3-2-2-2 ADVANCED ADVANCED GREEN ENHANCEMENT SKY ENHANCEMENT RED ENHANCEMENT SKIN TONE GAMMA RECALL : SELECT : ENTER MENU: EXIT GREEN ENHANCEMENT Select to give the white colors a neutral tint. SKY ENHANCEMENT Select to give the white colors a blue tint. RED ENHANCEMENT Select to give the white colors a red tint SKIN TONE Use this function to choose the favorite skin color. GAMMA Changes the color space. RECALL Resets all settings to the factory default.
20" LCD TV User's Manual 3-2-2-3 TV TV IMPORTANT: Available for TV input source only. : SELECT COUNTRY CH-SCAN MANUAL SCAN : ENTER MENU: EXIT Use this function to select the country of you inhabit. Use this function to automatically search and all TV channels to channel list. Press the button to enter the manual scan table. You can use the following item to search and edit the TV channel. SEARCH 471.
20" LCD TV User's Manual PR-EDIT Press " " button to turn up the PR-EDIT table. PROG CH FREQ SYSTEM NAME P1 P2 P3 P4 P5 C21 C22 C23 ----- 471 479 487 ----- PAL-BG PAL-BG PAL-BG ----- AAAAA BBBBB CCCCC ----- : SELECT : SELECT R : ENTER : ENTER MENU: EXIT To Process Swap two programs. 1. Press "R" button to highlight the channel you wish to change in gray. 2. Use the " "" " button to select which program number to switch. 3. Press "R" button again to swap this two program.
20" LCD TV User's Manual 3-2-2-4 AUDIO AUDIO BASS TREBLE BALANCE AUDIO MODE RECALL : SELECT : ENTER MENU: EXIT BASS TREBLE BALANCE AUDIO MODE Adjusts the volume of bass. Adjusts the volume of treble. Adjusts the balance of left and right sound channels. Select the audio situation RECALL Resets all settings to the factory default.
20" LCD TV User's Manual 4 Other Information 4-1 Troubleshooting If your LCD set fails to display abruptly, you can directly refer to our recommendation troubleshooting hints as below to find out its exactly defected root cause and restore its display performance completely. But if the anomalous circumstance you met has not been solved yet after you followed up our hints, we suggest that you had better to contact with your dealers for further after service assistance.
20" LCD TV User's Manual Problem Check item Remote Control does not work. Make sure batteries are inserted correctly. Batteries could be weak. Duplicate or "Ghost" channels located during scan. Use the " CH ADD/ERASE " function to " ERASE " duplicate or unwanted channels from the database of active channels. You cannot see a picture. Make sure that the power cord is plugged into a grounded electrical outlet. Make sure that the power button is turned on.
20" LCD TV User's Manual 4-2 Wall Mounting 100 mm 100 mm 100 mm 100 mm (1) Remove this TV's stand. (2) Using four "4x10" screws to fix wall mount. (3) And hook the LCD TV onto the wall mount bracket. NOTE: 1. The rack for wall-mounting installation is not an accessory coupling with this product. Please order your own rack if there is a need for wall mounting. 2. Please purchase a standard wall-mounting rack. Be sure to check the maximum weight the rack could support, preferably more than 14 kg.
