Datasheet

PC Setup

- You can easily connect the LCD Display to your PC for outstanding image and sound quality.

Setup instructions to connect a PC to your TV

• The screen does not display when the resolution is over UXGA.

• Connect the signal cable from the TV Output port on the PC to the RGB1

(PC/DTV INPUT) port on the TV.

• Connect the audio cable from the PC to the Audio port on the TV.

• If your PC computer is equipped with a sound card, adjust the sound output on the

PC.

• Select the display resolution of the PC to 1024X768 for the best picture. This TV

resolution is 1280X768.

• Avoid keeping a fixed image on the TV screen for a long period of time. The

fixed image may become permanently imprinted on the screen; use a screen

saver when possible.

• Change the resolution of thePC to displayable mode and connect to RGB1 Input

(PC/DTV Input) jack of the TV.

PC Setup

• First, turn on the display by pressing the button on the TV or by pressing

the POWER button on the TV remote control.

Second, turn on the PC computer.

• Use the TV/AV button on the remote control to select the RGB-PC input

source.

• Set the resolution of the PC to WXGA or under (1280 x 768@60Hz).

Tips

4683 LA2600-manualsamlet.qxp 21/10/04 16:35 Side 20