MSDS

PAGE 3 OF 8 East Penn Manufacturing Co., Inc.
MATERIAL SAFETY DATA SHEET
VALVE REGULATED LEAD ACID BATTERY,
NON-SPILLABLE
(US, CN, EU Version for International Trade)
SPECIAL FIREFIGHTING PROCEDURES & PROTECTIVE EQUIPMENT:
Use appropriate media for surrounding fire. Do not use carbon dioxide directly on cells. Avoid breathing vapours. Use full
protective equipment (bunker gear) and self-contained breathing apparatus.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Batteries evolve flammable hydrogen gas during charging and may increase fire risk in poorly ventilated areas near sparks,
excessive heat or open flames.
SPECIFIC HAZARDS IN CASE OF FIRE:
Thermal shock may cause battery case to crack open. Containers may explode when heated.
Additional Information
Firefighting water runoff and dilution water may be toxic and corrosive and may cause adverse environmental impacts.
SECTION 6: ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS:
Avoid Contact with Skin. Neutralize any spilled electrolyte with neutralizing agents, such as soda ash, sodium bicarbonate, or
very dilute sodium hydroxide solutions.
ENVIRONMENTAL PRECAUTIONS:
Prevent spilled material from entering sewers and waterways.
SPILL CONTAINMENT & CLEANUP METHODS/MATERIALS:
Add neutralizer/absorbent to spill area. Sweep or shovel spilled material and absorbent and place in approved container.
Dispose of any non-recyclable materials in accordance with local, state, provincial or federal regulations.
Additional Information
Lead acid batteries and their plastic cases are recyclable. Contact your East Penn representative for recycling
information.
SECTION 7: HANDLING AND STORAGE
PRECAUTIONS FOR SAFE HANDLING AND STORAGE:
• Keep containers tightly closed when not in use.
• If battery case is broken, avoid contact with internal components.
• Do not handle near heat, sparks, or open flames.
• Protect containers from physical damage to avoid leaks and spills.
• Place cardboard between layers of stacked batteries to avoid damage and short circuits.
• Do not allow conductive material to touch the battery terminals. A dangerous short-circuit may occur and cause battery
failure and fire.
OTHER PRECAUTIONS (e.g.; Incompatibilities):
Keep away from combustible materials, organic chemicals, reducing substances, metals, strong oxidizers and water.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS/SYSTEM DESIGN INFORMATION:
Charge in areas with adequate ventilation.
VENTILATION:
General dilution ventilation is acceptable.
RESPIRATORY PROTECTION:
Not required for normal conditions of use. See also special firefighting procedures (Section 5).
EYE PROTECTION:
Wear protective glasses with side shields or goggles.
SKIN PROTECTION:
Wear chemical resistant gloves as a standard procedure to prevent skin contact.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: None required under normal-use conditions for gel/absorbed
electrolyte-type batteries.
Wash hands after handling.