Air3 Compact Let’s get started U86-AC-B vax.co.
Let’s talk safety Thank you for buying this Air3 Compact. Basic safety precautions This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. • Only use the vacuum cleaner indoors on dry surfaces and keep the area your cleaning well lit. mental capabilities, unless they have been given instructions on how to use the machine or are supervised during use.
Contents Let’s talk safety Air3 Compact U86-AC-B Getting to know your machine Included with your machine Handle Getting to know your machine Getting started 3-in-1 crevice tool, dusting brush and upholstery tool Dirt container release button Wand release button Using your machine Pre-motor filter Taking care of your machine Let’s talk technical What to do if it goes wrong Brushbar on/off button Carry handle Quick release cord wrap Power on/off button Inner cyclones Post-motor filter Dirt contai
Getting started Using your machine PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE To activate brushes, press the brushbar on/off button at the top of the machine. Brushbar on — carpets. Brushbar off — hard floors. Assembling your upright Twist the cord holder to release the cord. Remove all packaging. Insert the handle. Attach the hose end to the floorhead ensuring it clicks into place. (All accessories can be used by either attaching them to the handle or the hose).
Taking care of your machine Taking care of your machine Emptying and cleaning the dirt container Press dirt container release button to remove the dirt container. Cleaning the pre-motor filter Hold dirt container over a bin and press dirt release button to open, allowing dirt to fall out. Unclip the dirt container lid to open. Lift lid to access inner cyclones. Unclip the dirt container lid to open. Tap Tap Remove filter. 40°C max 24hr Tap filter clean. Lift out the inner cyclones.
Let’s talk technical Let’s talk technical Re-setting the brushbar A RED light will indicate a jammed brushbar. Changing the belt Push the machine into the upright position to automatically reset the brushbar. A GREEN light indicates no blockages in the brushbar. IMPORTANT: If the brushbar, air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the blockage(s) before re-starting the vacuum cleaner. Switch off your vacuum cleaner at the main socket and unplug.
What to do if it goes wrong Problem Why does my vacuum cleaner have no power? Why won’t the vacuum cleaner turn on? My brushbar isn’t turning? My vacuum cleaner is making an excessive noise? Getting in touch Solution • The plug may not be fully pushed into the electrical socket. • Check the fuse in the plug if this needs replacing, always replace with a 13amp fuse. • The motor thermostat may have tripped. If this has happened, unplug the vacuum cleaner.
Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Pro cleaning kit 1-1-133326-00 All our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach areas such as on top of cupboards and in between blinds to the dust that collates behind and within the radiator. TurboTool 1-1-126261-00 A TurboTool for your vacuum cleaner.
@VaxUK Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK email: info@vax.co.uk website: vax.co.uk Version 2.0 EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the U86-AC series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste.