Use and Care Manual

A removable shoulder strap has been included for your convenience. To install the shoulder strap,

follow the instructions below.

Insert one side of the shoulder strap into the groove on the toolbox cover, and put the other side

into the slot (Fig. 6).

GENERAL OPERATION

INSTALLING & REMOVING BATTERY PACK

1. Flip the ON/OFF switch to the 'O' OFF position.

2. Lift the battery/tool compartment lid (Fig. 7).

3. To insert the battery pack, slide it into the battery bay until it snaps into place (Fig. 8).

4. To remove the battery pack, press the latch and pull it out of the battery bay (Fig. 9).

5. Close the battery/tool compartment lid and secure using the latches.

NOTE: This vacuum has 2 bays available. Use the left bay to operate the vacuum. The right

bay can be used for storage.

INSTALLING SHOULDER STRAP