Use And Care Manual

3
6
2
1
4
5
1. Remove the Ash Vacuum from the package.
2. Unlock the latches and remove the power head lid. (Fig. 1)
3. Remove the contents from inside the tank and make sure you have all the parts listed on page 5. (Fig. 2)
4. Turn the container upside down, and insert the casters on to the four feet of the container base. Ensure
that they are mounted correctly and "snap" into place. (Fig. 3)
5. Place the filter onto the rim of the tank. Make sure the edge of the filter fits snugly along the edge of
the tank. (Fig. 4)
6. With the filter installed, place the power head onto the container and secure it with the latches. (Fig. 5)
7. Insert the hose into the vacuum port and connect the metal intake nozzle into the other end of the
hose.(Fig. 6)