Use And Care Manual

ASH VACUUMING OPERATION
21
3
O
I
O
I
1. Make sure all parts are in place.
Never use ash vacuum without the filter in place.
Never use ash vacuum without the metal nozzle or crevice tool in place.
2. Make sure the power switch is in the "0" (OFF) position (Fig. 1).
3. Plug the power cord into the outlet, then turn on the ash vacuum by flipping the switch to the "I" (ON)
position. (Fig. 2 & Fig. 3)
4. Run the unit for 30 seconds after you have finished cleaning your stove or fireplace to ensure all
materials are safely captured in the container.
5. Once you have finished vacuuming, flip the switch to the "0" (OFF) position and unplug the power plug.
8
with one blade wider than
the other