Product Manual
10
1. Verify that the power cord is disconnected from the outlet. (g. 1)
2. Disconnect the hose from the vacuum. (g. 2)
3. Undo the latches and remove the power head from the collection tank. (g. 3)
4. Clear all dirt or debris from the collection tank and hose. (g. 4)
5. Check the hose, attachments, and power cord to verify that they have not been damaged.
IMPORTANT! Clean or change the cartridge lter regularly for best performance. ALWAYS USE
DUST FILTER FOR DRY VACUUMING. If the machine is used without the dust lter, the motor
will burn out and the warranty will be voided. Always keep spare dust lters on hand.
NOTICE! The lters included are made of high quality materials designed to stop small dust
particles. The dust lter should be used for dry pick-up only. A dry dust lter is necessary to pick up
dust. If the dust lter is wet, it will clog quickly and be difcult to clean. Handle the lter carefully
when removing it for cleaning or replacing. Check the lters for tears or small holes. A small hole
can let dust pass through and out of the cleaner. Do not use a lter with holes or tears in it; replace
it immediately.
CARE AND MAINTENANCE
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE
REMOVING THE POWER HEAD FROM COLLECTION TANK.