Wet/Dry/Shampoo Vacuum Operator’s Manual 6 Gallon Model No. VK609PFR 0201 FOR YOUR SAFETY Read and understand this manual before use. Keep this manual for future reference. Distributed By Suzhou Cleva Electric Appliance Co., Ltd. NO.8 Ting Rong Street 215122 Suzhou - China Replacement Filters & Accessories available at: www.amazon.com.
TABLE OF CONTENTS SECTION PAGE Warranty......................................................................................................................................... 3 Important Safety Instructions.......................................................................................................... 4 Double Insulation Instructions........................................................................................................ 6 Extension Cords.........................................
WARRANTY We take pride in producing a high quality, durable product. This Vacmaster® product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. If product is to be used for commercial, industrial, or rental use, a 90 day limited warranty will apply. Please keep your receipt as proof of purchase. This warranty gives you specific legal rights, which may vary from state to state.
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS VACUUM. Read and understand this operator’s manual and all labels on the vacuum cleaner before operating. Safety is a combination of common sense, staying alert and knowing how your vacuum works. Use this vacuum only as described in this manual. To reduce the risk of personal injury or damage to your vacuum, use only manufacturer recommended accessories. SAVE THIS MANUAL FOR FUTURE REFERENCE.
CAUTION: To reduce the risk of injury from moving parts - Unplug before servicing. WARNING: To reduce the risk of electric shock - Unplug before cleaning or servicing. FCC COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation.
DOUBLE INSULATION INSTRUCTIONS This Wet/Dry Shampoo Vacuum is double insulated, eliminating the need for a separate grounding system. Use only identical replacements parts. Read the instructions for Servicing DoubleInsulated Wet/Dry Shampoo Vacuums before servicing. Use this vacuum as described in this manual. Observe the following warnings that appear on the motor housing of your vacuum. DOUBLE INSULATED - GROUNDING NOT REQUIRED - WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS.
EXTENSION CORDS When using an extension cord with your Wet/Dry Shampoo Vacuum refer to the following table to determine the required A.W.G. wire size. Before using the cleaner make sure the power cord and extension cord are in good working condition. Make repairs or replacements before using the vacuum cleaner. Only use extension cords that are rated for outdoor use. Length of Extension Cord 120V 25ft (7.62m) 50ft (15.24m) Ampere rating 100ft (30.48m) 150ft (45.72m) A.W.G.
UNPACKING & CHECKING CARTON CONTENTS B A E C D Remove all contents from the box. Remove the power head and take out any contents inside the collection tank. Check each item against the carton contents list. Carton Contents List: F I O T J P L K Q R G H M N S Key A B C D E F G H I J K L M N O P Q R S T U U Description ..…………....……….….... Qty. Vacuum Assembly…....……….…......... 1 Handle.................................................. 1 Washable Cartridge Filter…....………...
ACCESSORIES A choice of accessories and attachments are supplied with this product. Refer to below descriptions for their functions. Illustration Description Function Handheld Shampoo Nozzle For cleaning sofas, chairs, stairs, and car interiors. Carpet Shampoo Nozzle Used without brush holder for cleaning carpets. Used with brush holder for cleaning hard floors. Crevice Tool For cleaning edges, gaps, and tight spaces.
GENERAL ASSEMBLY INSTRUCTIONS A Philips head screw driver is required. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ① WARNING: DO NOT PLUG THE POWER CORD INTO A POWER OUTLET. MAKE SURE THE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY SHAMPOO VACUUM. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN. UNPACKING YOUR WET/DRY SHAMPOO VACUUM & GENERAL ASSEMBLY 1. Verify that the power cord is disconnected from the outlet (Fig. 1). 2. Undo the latches (Fig. 2). 3.
9. Optional: For improved dust filtration, fit the dust bag flange onto the inlet port, taking care not to damage the bag (Fig. 9). NOTE: The dust collection bag is for dry pick-up only. 10.For wet vacuum cleaning, remove the cartridge filter, and install the supplied foam wet filter. See page 20 for the foam wet filter installation instructions (Fig. 10). 11. Position the hose storage rack as illustrated. Squeeze the open sides of the hose storage rack inward.
DRY VACUUM OPERATION 1 2 3 4 5 6 7 8 9 10 11 DRY VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION ENTITLED “IMPORTANT SAFETY INSTRUCTIONS”. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN, OR GUN POWDER.
5. Place the power head back on the collection tank and secure it in place using the latches (Fig. 6). OPERATING INSTRUCTIONS: DRY VACUUMING 6. Insert the locking end of the hose into the vacuum port on the collection tank and lock into place (Fig. 7). 7. Choose the desired accessory and connect onto the remote-control handle or the extension wand (Fig. 8). The air flow regulation on the remote-control handle allows you to manually change the amount of vacuum suction. 8.
GUN POWDER. TO REDUCE THE RISK OF HEALTH HAZARDS FROM VAPORS OR DUST, DO NOT VACUUM TOXIC MATERIALS. WARNING: DO NOT PLUG THE POWER CORD INTO A POWER OUTLET. MAKE SURE THE PLUG IS DISCONNECTED BEFORE CHANGING THE FILTERS. 1. Verify that the power cord is disconnected from the outlet. Make sure that the collection tank is clean and free of dust and dirt (Fig. 1). 2.
CARPET/UPHOLSTERY CLEANING OPERATION 1 2 3 4 6 7 8 9 5 ② ③ 10 13 12 11 14 15 I 16 II 17 18 6 Gallon Detergent Mode Vacuum Mode 19 II I WARNING: DO NOT RUN THE VACUUM IN DETERGENT MODE WITHOUT SOLUTION IN THE CLEANING SOLUTION TANK. WARNING: USE ONLY MANUFACTURER RECOMMENDED CLEANING SOLUTION WITH THIS VACUUM CLEANER.
CAUTION: BEFORE YOU USE THIS PRODUCT TO SHAMPOO CLEAN AN AREA, TEST YOUR WET/DRY SHAMPOO VACUUM AND THE CLEANING SOLUTION ON A SMALL HIDDEN AREA FOR COLORFASTNESS. IF THE COLOR IS AFFECTED, DO NOT USE. CAUTION: THE CLEANING SOLUTION CONTAINS A CHEMICAL SOLUTION. AVOID PROLONGED CONTACT AS SOME INDIVIDUALS MAY EXPERIENCE SKIN AND EYE IRRITATION. FOR SKIN AND EYE IRRITATION, WASH AFFECTED AREA WITH WATER FOR 5-10 MINUTES. IF IRRITATION PERSISTS, SEEK MEDICAL ATTENTION IMMEDIATELY.
9. To clean sofas, chairs, stairs, and car interiors, connect the handheld shampoo nozzle onto the remote-control handle (Fig. 14). NOTE: When cleaning the headliner of your car, rotate the air flow regulation counter-clockwise to decrease the suction power if the suction power is high. NOTE: If there is dirt or debris accumulated in the handheld shampoo nozzle, press the release button and remove the cover from the nozzle for cleaning (Fig. 15). 10.Plug the power cord into a power outlet (Fig. 16). 11.
MAINTENANCE 1 2 4 3 5 EMPTYING THE COLLECTION TANK WARNING: ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE REMOVING THE POWER HEAD FROM COLLECTION TANK. 1. Verify that the power cord is disconnected from the outlet (Fig. 1). 2. Press down the yellow latch on the cleaning solution delivery tube and unplug the delivery tube from the vacuum. Then disconnect the hose from the vacuum (Fig. 2). 3. Disconnect the cleaning solution tube from the cleaning solution tank (Fig. 3). 4.
INSTALLING & CLEANING CARTRIDGE FILTER 1 2 3 6 7 8 4 5 INSTALLING CARTRIDGE FILTER 1. Verify that the power cord is disconnected from the outlet (Fig. 1). 2. Remove the power head and place in an upside-down position. 3. Install the cartridge filter over the filter cage making sure the cage is completely covered (Fig. 2 & 3). 4. Place the filter retainer on the top of the cartridge filter over the raised lip and tighten down by turning the retainer clockwise; do not over-tighten (Fig. 4 & 5). 5.
INSTALLING & CLEANING FOAM WET FILTER 1 2 4 3 5 INSTALLING FOAM WET FILTER 1. Verify that the power cord is disconnected from the outlet (Fig. 1). 2. Remove the power head and place in an upside-down position. Follow instructions to remove the cartridge filter on page 19. 3. Carefully slide the foam wet filter down over the filter cage making sure the cage is completely covered (Fig. 2 & 3). 4. Place the power head onto the collection tank. CLEANING FOAM WET FILTER 1.
CLEANING & REPLACING EXHAUST FILTER 1 2 4 3 1. Verify that the power cord is disconnected from the outlet (Fig. 1). 2. Unlock the exhaust filter door by lifting the locking tab upwards to the release. Pull the door out (Fig. 2). 3. Remove the exhaust filter from the vacuum and clean by gently tapping or brushing off dirt. For optimal performance it is recommended to replace the old filter with a new filter regularly (Fig. 3). 4. Install the cleaned or new filter.
TROUBLESHOOTING WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE TROUBLESHOOTING. PROBLEM The wet/dry shampoo vacuum will not operate. The dust comes out from the motor cover. POSSIBLE CAUSE Faulty power cord, switch, or motor. Unplug and check the power cord. If damaged, have it repaired by a professional or call customer service. No power supply. Check the power supply, cord, breakers, and fuses. On/Off switch is in the wrong position. Or the correct mode button is not selected.
PROBLEM Foam is leaking from the outlet on the power head. The remote control will not operate. POSSIBLE CAUSE SOLUTION Incorrect cleaning solution or incorrect mix ratio is used. Use manufacturer’s cleaning solution or high-quality lowfoaming liquid carpet cleaning solution. Ensure the cleaning solution is mixed with water at the correct ratio. The battery has no charge. Replace the old battery with a new one. The remote control is not programmed.
EXPLODED VIEW 24
PARTS LIST Part Part Number Description Quantity 1 2 551657101 Handle Assembly 1 551657102 Hose Storage Rack 2 3 Power Head Assembly 1 4 551005103 Float 1 5 551437105 Filter Cage 1 6 551324103 Exhaust Filter Door 1 7 551121122 Exhaust Filter Assembly 1 8 551661102 Latch Assembly 2 Collection Tank 1 9 10 551661104 Vacuum Port Assembly 1 11 551002110 Drain Cap Assembly 1 12 551617105 Vacuum Base 1 13 551099105 Rear Caster 2 14 551661105 Caster Foot Assembl
