Wet/Dry Vacuum Operator’s Manual 2.5 Gallon Model No. VOM205P FOR YOUR SAFETY Read and understand this manual before use. Keep this manual for future reference. Distributed By Cleva North America, Inc. 601 Regent Park Court Greenville, SC 29607 Replacement Filters & Accessories available at: Vacmaster.
TABLE OF CONTENTS SECTION PAGE Warranty........................................................................................................................................ Safety Instructions & Warnings..................................................................................................... Double Insulation Instructions....................................................................................................... Extension Cords.....................................................
SAFETY INSTRUCTIONS & WARNINGS IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS VACUUM. Read and understand this operator's manual and all labels on the Wet/Dry Vacuum cleaner before operating. Safety is a combination of common sense, staying alert, and knowing how your vacuum works. Use this Wet/Dry Vac only as described in this manual. To reduce the risk of personal injury or damage to your Wet/Dry Vac, use only Vacmaster® recommended accessories.
DOUBLE INSULATION INSTRUCTIONS This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system. Use only identical replacements parts. Read the instructions for Servicing Double-Insulated Wet/Dry Vacs before servicing. Use this Wet/Dry Vac as described in this manual. Observe the following warnings that appear on the motor housing of your Wet/Dry Vac. DOUBLE INSULATED - GROUNDING NOT REQUIRED - WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS.
UNPACKING & CHECKING CARTON CONTENTS A F G B C D E H I Remove all contents from the box. Remove the power head and take out any contents inside the collection tank. Check each item against the carton contents list. Carton Contents List Key Description........................... Q t y. A Vac Assembly...........................1 B Wall Mounting Support.. ............1 C Hose.........................................1 D Crevice Tool..............................1 E 2-in-1 Utility Nozzle...............
GENERAL ASSEMBLY INSTRUCTIONS Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and diagram. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Estimated Assembly Time: 25 minutes Tools Required for Assembly: Drill, Screwdriver Helpful Tools: Level 1 2 3 4 5 9 10 1 2 6 7 8 11 12 13 WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN.
6. Your vacuum comes ready for dry vacuum cleaning. For installation instructions, see page 12. 7. For wet vacuum cleaning, install the supplied foam wet filter. (fig. 7) For installation instructions, see page 12. 8. Place the power head back on the collection tank, and secure into place using the 2 side latches. (fig. 8 & 9) 9. Insert the larger end of the hose into the desired port. (fig. 10) 10. Choose the desired accessories and insert onto the end of the hose. (fig.
DRY VACUUM OPERATION 5 22 3 4 6 78 8 DRY VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN, OR GUN POWDER.
LIQUID VACUUM OPERATION 22 6 3 4 58 7 LIQUID VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN, OR GUN POWDER.
BLOWER OPERATION 12 2 3 4 This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed. WARNING: ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN CANADA, CSAZ94.3) BEFORE USING BLOWER. CAUTION: WARNING: BE INHALED. KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS. WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT 1. Verify that the power cord is disconnected from the outlet. (fig. 1) 2. Make sure the collection tank is empty before using as a blower. 3.
MAINTENANCE 1 2 3 4 1. Verify that the power cord is disconnected from the outlet. (fig. 1) 2. Disconnect the hose from the vacuum. (fig. 2) 3. Undo the latches and remove the power head from the collection tank. (fig. 3) 4. Clear all dirt or debris from the collection tank and hose. (fig. 4) For filter changing and maintenance see instructions on page 12. IMPORTANT! Clean or change the filter regularly for best performance. ALWAYS USE DUST FILTER FOR DRY VACUUMING.
INSTALLING & CLEANING REUSABLE CLOTH FILTER 1 2 3 4 5 Installing Reusable Cloth Filter 1. Verify that the power cord is disconnected from the outlet. (fig. 1) 2. Remove power head and place in upside down position. 3. Slide reusable cloth filter down over the filter cage making sure the cage is completely covered. (fig. 2 & 3) 4. Place and lock the power head onto the collection tank. Removing and Cleaning Reusable Cloth Filter 1.
TROUBLESHOOTING WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE TROUBLESHOOTING. Symptom Vacuum will not operate Dust comes from motor cover. Possible Causes 1) No power supply. 2) 3) 1) 1) Reduced efficiency and motor/ speed vibration. Corrective Action 1) Check power supply – cord, breakers, fuses. Faulty power cord. 2) Unplug and check the power cord. If damaged, have it repaired by a professional. Collection tank full. 3) Empty collection tank.
EXPLODED VIEW 9 1 10 2 11 3 6 4 12 7 5 8 14 13
PARTS LIST Part 1 2 3 4 5 6 7 8 9 10 11 12 13 Part Number 551012101 551013104 551012116 551012104 551012107 551098111 551012109 551004113 551009111 551012110 551012108 Description Handle Power Head Float Filter Cage Collection Tank Vacuum Port Wall Mount Hook Assembly Wall Mount Support Assembly Crevice Tool 2-in-1 Utility Nozzle Foam Wet Filter Cloth Filter 1-1/4" x 4' Hose 15 Quantity 1 1 1 1 1 1 1 1 1 1 1 1 1
