Use & Care Guide 18V 2-in-1 Cordless Stick Vacuum MODEL NO. VSD1801 www.vacmaster.com Cleva North America, Inc.
TABLE OF CONTENTS SECTION PAGE Important Safety Instructions................................................................................................................3-5 Warranty…………....................................................................................................................................6 Technical Data........................................................................................................................................6 Getting To Know Your Vacuum.........
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING - To reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces. • Do not allow to be used as a toy.
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush affected area with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
WARNING Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARRANTY FOR ONE YEAR from the date of sale, this product is warranted against defects in material or workmanship when it is assembled, operated and maintained according to all supplied instructions. WITH PROOF OF SALE, a defective appliance will be replaced free of charge. For warranty coverage details to obtain free replacement, visit the web page: www.vacmaster.com or call (866) 384-8432.
GETTING TO KNOW YOUR VACUUM Handle Hand Vacuum Handle Power Button Filter Speed Control Button Filter Basket Dust Cup Folding Handle Button Dust Cup Release Button Hand Vacuum Release Button Hand Vacuum On/Off Button Hand Vacuum Nozzle Release Button LED Headlights Combination Tool Storage Charging Base Motorized Brush Powerhead Charging Adapter 2-In-1 Combination Tool REPLACEMENT PARTS Item Filter Charging base Combination Tool Charging Adapter Filter Basket Brushroll Part No.
GENERAL ASSEMBLY INSTRUCTIONS Assembly Instructions 1. Unfold the vacuum folding handle. Put the vacuum folding handle upward, until there is a click from the folding handle button. Click 2. Fit the end of the main body onto the neck of the motorized powerhead and click into place.
3. Insert the hand vacuum into the slot on the bottom of main body, then press the handle into locked slot and click into place. 2 1 4. Insert the top of the charging base into the bottom of the charging base and lock into place. 5. Insert the charging connector into the charging port on the side of charging base.
6. Plug the adapter into a wall outlet. Note: Use only the charger supplied with your cleaner to recharge. 7. Insert the 2-in-1 combination tool into the slot on the charging base for convenient storage. Charging Instructions 1. Before charging, make sure the cordless vacuum is turned OFF. With the hand vacuum installed in the stick vacuum, insert the vacuum cleaner onto the charger base as shown. Make sure the charging adapter is plugged into an outlet.
2. The Hand vacuum on/off button will show the progress of the charge. While the vacuum is being charged, the battery charge indicator will be flashing. Once fully charged, the indicator will be off. On/Off Button & Battery Indicator Battery indicator Status Flashing light Charging No light Fully charged 3. For improved battery performance, keep the vacuum cleaner on the charging base while not in use. Do not start the vacuum cleaner while it is on the charging base.
2. To switch the speed to LOW, press the speed control button. Press the speed control button again to switch back to HIGH speed. 3. To stop the vacuum, press the power button. Using Your Hand Vacuum 1. To remove the hand vacuum, press the hand vacuum button and detach from the main body. 1 Hand vacuum release button 2 Hand vacuum 2. To turn on, press the power button located on the handle. 3.
4. The combination tool can be used as a crevice tool or dusting brush. To transition from crevice to dusting brush, depress the latch on the tool and slide the part to the top of the tool. Storing Your Vacuum 1. Fold handle by pressing handle release button and pulling handle backward. 2. To operate vacuum, unfold the handle by moving it upward until you hear a click. CAUTION Moving parts! To reduce the risk of personal injury, DO NOT touch the brush roll when vacuum is on.
MAINTAINING YOUR VACUUM CAUTION To reduce the risk of shock, remove vacuum cleaner from the charging base, and turn off before performing any service or maintenance. Emptying the Dust Container & Cleaning the Filter 1. Remove the hand vacuum from the main body by pressing the hand vacuum release button. 2. Hold the unit over a trash bin and use one hand to press the two dust cup release buttons to separate the dust cup from the hand vacuum body. 3. Remove the filter basket from the dust cup.
4. Remove the filter from the filter basket. Clean the accumulated debris from the filter basket and the filters. 5. After repeated use, it may be necessary to wash the filter basket and filter, Hand wash in lukewarm water. After washing, set aside and allow to air dry for 24 hours. Filter 24hrs Filter Basket IMPORTANT: The filter and the filter basket must be completely dry before reuse. 6. Insert the clean and dry filter into the basket.
Cleaning the Motorized Powerhead & Blockages The brush roll may accumulate debris such as strings, hair and fibers. This type of debris can wrap around the brush and diminish its ability to clean effectively. To Remove Brush Roll for Manual Cleaning: 1. Make sure the vacuum cleaner is turned OFF then remove the hand vacuum and set aside. 2. Turn the unit over to access the brush roll. As shown below,push and slide the tab to the right to unlock, then lift the brush roll out of housing.
TROUBLESHOOTING 2. Carefully remove any debris or blockage from the inside of the powerhead. 3. Reattach the powerhead onto the vacuum body. Note: Do not damage pins; do not use scissors or other sharp objects to remove a blockage from the powerhead as these may damage the powerhead.
TROUBLESHOOTING Should you have any problem(s) with your vacuum cleaner, review the table below for solutions to minor performance issues. WARNING Disconnect electrical supply before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury. PROBLEM POSSIBLE CAUSE Battery may be depleted. Charge the battery as instructed. Wrong charger being Be sure to use only the charger supplied with used. your product.
Brush roll is jammed. Motorized brush Brush roll needs to be not turning. reset. Remove obstruction. Follow instructions. Turn the unit off and remove the obstruction, then turn back on. Brush roll is not Remove brush roll and reinstall following installed well. instructions. Dust cup is full. Empty dust cup. Filter needs cleaning. Follow filter cleaning instructions. picking up or Filter needs to be To purchase online at www.vacmaster.com or suction power is replaced. call (866) 384-8432.
