emission condenser Peltronic Manual
Table Of Contents
- Part I
- Reset / Language selection
- Safety information!
- Technical data
- Use and operation
- Installing a pump in a vacuum system
- Notes regarding the (dry) ice condenser
- Notes concerning the operation of the inlet condenser IK
- Notes concerning the operation of the Peltronic emission condenser
- Notes concerning the operation of pumping units with silencer
- During operation
- Important notes regarding the use of gas ballast
- Important notes concerning the operation of the exhaust waste vapor condenser
- Shutdown & storage
- CVC 3000 Vacuum controller
- Menu guide
- Pump down function
- Vac Control function
- Auto mode
- Program function
- VACUULAN function
- Application examples
- Configuration
- Part II
- Readjustment of CVC 3000
- Calibration in the factory
- Cleaning the pressure transducer
- Interface parameters
- Accessories
- Troubleshooting
- Replacing diaphragms and valves
- Cleaning and inspecting the pump heads
- Disassembling the housing cover at the side of the emission condenser
- Replacing the diaphragm
- Assembling the housing cover at the side of the emission condenser
- Disassembling the housing cover at the side of the ON/OFF switch
- Assembling the housing cover at the side of the ON/OFF switch
- Assembling the fittings
- Cleaning and replacing components
- Notes on return to the factory
- Warranty
- Health and safety clearance form
- EC Declaration of Conformity of the Machinery
page 28 of 120
* Ultimate vacuum at setting ”Pump down” at speed ”HI”
** Running smoothly only at motor speeds higher than 200 rpm
*** Measurement according to EN ISO 2151:2004 and EN ISO 3744:1995 at 1500rpm and
ultimate vacuum with exhaust tube at outlet.
**** PC 3001 VARIO
pro
without condenser: Hose nozzle with silencer
***** PC 3001 VARIO
pro
without condenser: 12.2 (6.9)
Type
PC 3001
VARIO
pro
PC 3001
VARIO
pro
IK
Inlet
hose nozzle for
tubing I.D. 1/4” /
3/8” (hose nozzle
DN 6/10 mm)
hose nozzle for
tubing I.D. 1/2”
(hose nozzle DN
13 mm)
Outlet
hose nozzle for tubing I.D. 3/8”
(hose nozzle DN 10 mm)****
Coolant connection
(waste vapor condenser)
hose nozzle for tubing I.D. 1/4” - 5/16”
(hose nozzle DN 6-8 mm)
Maximum permissible pres-
sure of coolant at vapor con-
denser
psi
(bar)
87 (absolute)
(6 (absolute))
Permissible range of coolant
temperature (vapor condenser)
°F
(°C)
5 to 68
(-15 to +20)
Dimensions L x W x H
approx.
in
(mm)
11.8 x 12.0 x 15.7
(300 x 306 x 400)
12.2 x 12.3 x 15.7
(309 x 312 x 400)
Weight approx. lbs. (kg) 17.0 (7.7)***** 18.3 (8.3)
Type
PC 3001 TE
VARIO
pro
PC 3001 VARIO
pro
emission
condenser
Peltronic
Inlet
hose nozzle for
tubing I.D. 1/2”
(hose nozzle DN
13 mm)
hose nozzle for tub-
ing I.D. 1/4” / 3/8”
(hose nozzle DN
6/10 mm)
Outlet
hose nozzle for
tubing I.D. 3/8”
(hose nozzle DN
10 mm)
hose nozzle for
tubing I.D. 5/16”
(hose nozzle DN 8
mm)
Permissible range of coolant
temperature
°F
(°C)
-112 to 68
(-80 to +20)
-
Coolant capacity quarts (ml) 0.3 (275) -
Dimensions L x W x H
approx.
in
(mm)
13.2 x 10.2 x 18.9
(335 x 260 x 480)
11.8 x 14.6 x 15.7
(300 x 370 x 400)
Weight approx. lbs. (kg) 18.1 (8.2) 24.9 (11.3)