emission condenser Peltronic Manual
Table Of Contents
- Part I
- Reset / Language selection
- Safety information!
- Technical data
- Use and operation
- Installing a pump in a vacuum system
- Notes regarding the (dry) ice condenser
- Notes concerning the operation of the inlet condenser IK
- Notes concerning the operation of the Peltronic emission condenser
- Notes concerning the operation of pumping units with silencer
- During operation
- Important notes regarding the use of gas ballast
- Important notes concerning the operation of the exhaust waste vapor condenser
- Shutdown & storage
- CVC 3000 Vacuum controller
- Menu guide
- Pump down function
- Vac Control function
- Auto mode
- Program function
- VACUULAN function
- Application examples
- Configuration
- Part II
- Readjustment of CVC 3000
- Calibration in the factory
- Cleaning the pressure transducer
- Interface parameters
- Accessories
- Troubleshooting
- Replacing diaphragms and valves
- Cleaning and inspecting the pump heads
- Disassembling the housing cover at the side of the emission condenser
- Replacing the diaphragm
- Assembling the housing cover at the side of the emission condenser
- Disassembling the housing cover at the side of the ON/OFF switch
- Assembling the housing cover at the side of the ON/OFF switch
- Assembling the fittings
- Cleaning and replacing components
- Notes on return to the factory
- Warranty
- Health and safety clearance form
- EC Declaration of Conformity of the Machinery
page 9 of 120
Contents
Part I................................................................. 1
Reset / Language selection ............................................. 8
Safety information! ........................................................... 11
Important information! ........................................................................11
General information ........................................................................... 13
Intended use...................................................................................... 13
Setting up and installing the equipment ............................................ 14
Ambient conditions ............................................................................ 17
Operating conditions ......................................................................... 17
Safety during operation ..................................................................... 19
Maintenance and repair..................................................................... 23
`
Important information: Equipment marking (ATEX) ................... 25
Technical data ................................................................... 27
General technical data valid for all pumping units ............................ 27
Gas inlet temperatures ..................................................................... 30
Wetted parts ..................................................................................... 30
Abbreviations .................................................................................... 31
Pump parts ....................................................................................... 31
Use and operation ............................................................ 38
Installing a pump in a vacuum system .............................................. 38
Notes regarding the (dry) ice condenser .......................................... 43
Notes concerning the operation of the inlet condenser IK ................ 45
Notes concerning the operation of the
Peltronic emission condenser ........................................................... 46
Notes concerning the operation of pumping units with silencer ........ 46
During operation ................................................................................ 47
Important notes regarding the use of gas ballast .............................. 48
Important notes concerning the operation of
the exhaust waste vapor condenser.................................................. 49
Shutdown & storage .......................................................................... 51
CVC 3000 Vacuum controller ............................................................ 52
Menu guide ........................................................................ 57
Pump down function ........................................................ 59
Vac Control function ........................................................ 61
Auto mode ......................................................................... 64
Program function .............................................................. 66
Application example ......................................................................... 68