User Manual

Documents are only to be used and distributed completely and unchanged. It is strictly the users’ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999164 / 19/05/2009
page 31 of 75
Temporary switching from ”Pump down” to ”Vac control” or ”Auto mode” (only if control is run-
ning):
☞ Press key ”MODE”. The controller switches to function ”Vac control”, the current vacuum is used as
set value.
☞ Pressing key ”MODE” again switches to function ”Auto mode”. The controller adapts the boiling pres-
sure starting from the current vacuum.
☞ The preset function of the controller does not change due to this temporary switching. When pressing
key ”STOP” the controller is set again to the function ”Pump down”.
Adapting the pumping speed during pump down:
☞ Press the selection knob and turn.
☞ Turning the knob to the left reduces the speed.
☞ Turning the knob to the right increases the speed.