User Manual

Documents are only to be used and distributed completely and unchanged. It is strictly the users’ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999164 / 19/05/2009
page 47 of 75
Description
set vacuum
maximum speed
(100% = ”HI”)
switching on pressure for VACUULAN or
two point control
delay
(00:00 = Off)
switch off pressure (”Maximum” for ”Vac control”,
”Minimum” for ”Pump down”)
process runtime
time in program step y (0.....9)
pressure in program step y (0.....9)
software version
Response
XXXX mbar or
XXXX Torr or
XXXX hPa
XXX%
XXXX mbar or
XXXX Torr or
XXXX hPa
XX:XX h:m
XXXX mbar or
XXXX Torr or
XXXX hPa
XX:XX h:m
XX:XX:XX h:m:s
XXXX mbar
X
X
X
CVC 3000 VX.XX
Operation Command
IN_SP_1
IN_SP_2
IN_SP_3
IN_SP_4
IN_SP_5
IN_SP_6
IN_SP_P1y
IN_SP_P2y
IN_SP_P3y
IN_SP_P4y
IN_SP_P5y
IN_VER
time
pressure
valve
Step
Auto
Read commands ”CVC 3000”
0: no venting valve in program step y (0.....9)
1: venting valve in program step y (0.....9)
0: no ”Step” in program step y (0.....9)
1: ”Step” in program step y (0.....9)
0: no ”Auto” in program step y (0.....9)
1: ”Auto” in program step y (0.....9)