Manual

Operation
43BA-N°: 999279/17.10.2014
Remontecontrol/
Control mode
6.4 Remote control – mode “Control”
WARNING
Misuse can cause physical injury or damage to
property
Misuse or improper operation causes harm and can
lead to physical injury or damage to property.
> Observe all safety instructions of these instructions
for use and the safety instructions of the remote
controlled device.
> Use the system only for its intended use.
> Use the system only with knowledge to function and
operation.
> Never operate critical processes by remote control!
> Preventhazardscausedbyparallelentries,such
as simultaneous operation via several end devices.
Arrange operation by remote control with colleagues.
> Set up password protection
 see chapter: “7.1.2 Password management”.
In addition to the status display, the control elements are enabled
foroperatingbyremotecontrol=“Control”mode.Thismeansyou
have direct access to the vacuum system.
Mode“Control”isintendedforpersonnelwithread‑/writepermis-
sion.
Switch to control mode
> Clickonselectorswitch“Control”ontheupperleftside.
5 Selectorswitch“Control“ismarked.
5 Display with current pressure appears.
> Ask your system administrator for the password, if an
access window appears.