Manual

Resolving problems
68 BA-N°: 999279/17.10.2014
8.1.2 Internal errors
Error messages that result from internal errors of the remote control are displayed
directly in the web browser.
Error messages shown on user interface (GUI)
Error message shown on user interface 3Remedy
Controller is switched off! `3 switch on controller
You are using an outdated browser that is not
compatible with this software. Please try again
with a later browser version!
`3 install the latest software version of the
web browser  see “3.2 System require-
ments” chapter
Network conguration changed.
`3 reload site
`3 wait,considerbootingtimeforWLAN
adapter
`3 check network connection, select and
connect again.
CVC 3000 needs update to work properly with
VACUU•CONTROL™. Go to update page.
`3 updateCVCrmware,
 see chapter “Updating CVC 3000 rm-
ware”
This controller is currently not supported.
`3 contact our Service, and ask for a list with
compatible devices
No communication with controller. Please check
settings.
`3 connect controller
`3 checkbaudvalueatcontroller(CVC/Con-
guration/Baud=19200)
`3 checkRS232settingsatCVCandifnec-
essary reset to factory settings
`3 system administrator: reset
VACUU•CONTROL™ to factory settings
Update in progress. Please wait.
`3 waituntilupdatehasnished
Connection interrupted! Please reload page. `3 reload page
JavaScript disabled.
`3 enableJavaScriptforyourwebbrowser
Update failed. Check le. `3 checkupdateleorrestartdownload
 Link
8.2 Troubleshooting table
Fault ` Cause 3Remedy
Personnel
Network out of
range.
`` WLANsignalimpairedby
interfering signals.
`` DistancebetweenWLAN
adapter and end device is
too far.
`3 DonotplaceWLANadapter
in the vicinity of sources of
electro-magnetic interference
`3 In case of larger distances,
useaWLANroutertointe-
gratetheWLANadapterinto
your network.
Admin