User Manual

Auto Presenter
AutoPresenter Manual 342-0029 Rev D Page 17 of 28
Menu Structure Continued
SD Video Format
>Select
>Letter Box
>Crop
>Squeeze
Enables the use of some SD signals to be mixed with HD video signals while avoiding aspect ratio problems
Default Preset No Default Preset Number
>Select
> 01 – 72
Assigns camera preset 1 through 72 as Default Preset on the default camera (default is 01)
Default Timer
>Select
>00 – 60
Default Camera Idle Return Timer - with no other trigger input, the system returns to the Default Camera and
Default Preset after this time elapses (default is 10, 00 disables function)
Preset Pan Speed
>Select
>01 – 24 (default is 18)
Sets the Pan Speed on all cameras between camera presets (24 is fastest)
Preset Tilt Speed
>Select
>01 – 20 (default is 15)
Sets Tilt Speed on all cameras between camera presets (20 is fastest)
Preset Zoom Speed
>Select
>00 – 07 (default is 04)
Sets Zoom Speed on all cameras between camera presets (06 is fastest
Cam Search Menu
>Select
>All Ports: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 01: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 02: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 03: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 04: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 05: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 06: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
NOTE: When using Panasonic cameras, you must select Panasonic. If there is no camera connected
to the control port of an input, selecting No Camera Input will lower the time of the boot-up process by
not scanning for a camera on those selected inputs.
System Menu
>Select
>Serial Input
>Select
>ON or OFF
Turns on or off serial input (default is ON).
>Serial Echo
>Select
> ON or OFF
Turns Serial Echo on or off (default is ON).
>Serial Info
>Select
> ON or OFF
Reports button pushes on front panel to the serial port (default is OFF).
>Panel Lights
>Select
>00 through 50
Panel Light Brightness (all lights - 50 is the brightest) (default is 25, off is 00).
>Clear Memory
>Select
>Start
Clears the camera preset memories and sets all parameters to default settings.