Specifications

AutoTrak 2.0 Camera Tracking System
AutoTrak 2.0 Camera Tracking System - Document Number 342-0382 Rev. B Page 10 of 52
Belt Pack Dip Switch Settings:
Belt Pack Configuration Settings:
The Belt Pack has a number of custom settings that can be enabled or disabled for specific applications.
These settings can be applied by activating dip switch settings on the two (2) 4-position dip switches SW4
and SW5 located on the Belt Pack Circuit Board
.
Switch Set 4:
 SW4: Dip Switch 1 - Not Used
 SW4: Dip Switch 2 - IR Transmitter: ON enables the IR Transmitter LED’s in the IR Lanyard. OFF
disables the IR Transmitters in the Lanyard and the camera tracking will not function.
 SW4: Dip Switch 3 - Radio in Belt Pack: ON enables the Radio circuit in the Belt Pack. OFF
disables will turn off the Radio circuit.
Note: Turn OFF Dip Switch 3 when not using the optional EasyTalk AutoTrak 2.0
Wireless Audio Interface with the AutoTrak 2.0 System.
 SW4: Dip Switch 4 - Clear Pairing: ON clears the pairing setting of the receiver in the Belt Pack.
.
Switch Set 5:
 SW5: Dip Switch 1 - 3dB Gain Boost: Enable adds a three (3) dB gain to the microphone audio.
Disable provides zero gain.
 SW5: Dip Switch 2 - 6dB Gain Boost: Enable adds a six (6) dB gain to the microphone audio.
Disable provides zero gain.
 SW5: Dip Switch 3 - 9dB Gain Boost: Enable adds a nine (9) dB gain to the microphone audio.
Disable provides zero gain.
Note: The following Gain Boost Switches, 1 through 3, can be used individually or in
combination. For example, if Dip Switch 1, 3dB Gain and Dip Switch 2, 6dB Gain are
both ON, they will add a total of 9 dB of gain
 SW5: Dip Switch 4 - Automatic Gain Control: ON enables an Automatic Gain Control function that
maintains a constant audio level to regulate soft talkers as well as loud talkers. OFF disables the
Automatic Gain Control, of course.
Switch
Number
Dip Switch Function
Switch Set 4
1 Not Used
2 ON/OFF - IR LED’s in Lanyard
3 ON/OFF - Radio in Belt Pack *Turn off when not
using Optional EasyTalk Wireless Receiver
4 Clear Pairing (pairing is required for proper operation)
Switch Set 5
1 ON/OFF: ON adds 3dB Gain Boost on Microphone
2 ON/OFF: ON adds 6dB Gain Boost on Microphone
3 ON/OFF: ON adds 9dB Gain Boost on Microphone
4 ON/OFF: Automatic Gain Control Mode
SW3
SW4
SW5