Specifications

AutoTrak 2.0 Camera Tracking System
AutoTrak 2.0 Camera Tracking System - Document Number 342-0382 Rev. B Page 19 of 52
8) With the Tracking Camera plugged into a monitor, select the Presets① Tab and then the Tracking
Camera② Tab. Adjust the Position③ buttons and the Zoom④ buttons to tilt/zoom the camera to the
desired presenter framing. Set the zoom position and the tilt angle of the Tracking Camera and click
on the Save Preset Button⑤ to store the System Tracking Preset. The Load⑥ button is for recalling
a previously saved preset.
Note: The AutoPresenter Camera Presets ⑦ are supported by AutoTrak 2.0 when used in
conjunction with an AutoTrak POD or a AutoPresenter 6x1 HD Seamless Switcher and Automated
Camera Preset Controller. A later section explains the connectivity and set-up when using these
devices together.
①
②
③
⑤
④
⑥
⑦