Specifications

AutoTrak 2.0 Camera Tracking System
AutoTrak 2.0 Camera Tracking System - Document Number 342-0382 Rev. B Page 43 of 52
Compliance and CE Declaration of Conformity: AutoTrak 2.0 CPU
Compliance testing was performed to the following regulations:
 FCC 47 CFR Part 15, Subpart B/Oct. 2009 Class A
 ICES-003, Issue 4: 2004 Class A
 EN-55011: 2007 + A2: 2007 Class A
 EN 55022: 2006 + A1: 2007 Class A
 CISPR 22: 1997 Class A
 EMC Directive 2004/108/EC Class A
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his/her own expense.
 Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This
device must accept any interference including interference that may cause undesired operation of the device.
 Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the
user’s authority to operate this equipment.
ICES-003 Compliance
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux appareils
numeriques de la classe A préscrites dans le Règlement sur le brouillage radioélectrique édicte par le ministère des
Communications du Canada.
European Compliance
This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for Emissions and
Immunity and meets the requirements for a Class A digital device. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
Standard(s) To Which Conformity Is Declared:
EMC Directive 2004/108/EC
EN-55011: 2007 + A2: 2007 Emissions
EN 55022: 2006 + A1: 2007 Conducted and Radiated Emissions
EN 61000-6-4: 2007 Electromagnetic Compatibility
EN 61000-3-2: 2006 Limits for Harmonic Content
EN 6100-3-3: 2008 Limits for Voltage Fluctuations and Flicker
EN 61000-6-2: 2005 Immunity for Industrial Environments
EN 55024: 1998 + Amendments A1: 2001 + A2: 2003 Immunity
 EN 61000-4-2: 2008 Electrostatic Discharge
 EN 61000-4-3: 2008 Radiated Immunity
 EN 61000-4-4: 2004 + Corrigendum 1:2006 + Corr. 2:2007 Electrical Fast Transients
 EN 61000-4-5: 2005 Surge Immunity
 EN 61000-4-6: 2008 Conducted Immunity
 EN 61000-4-8: 2009 Power Frequency Magnetic Field
 EN 61000-4-11: Second Edition: 2004 Voltage Dips, Interrupts and Fluctuations