User guide

AutoTrak 2.0 Camera Tracking System
AutoTrak 2.0 Camera Tracking System - Document Number 342-0382 Rev. E Page 36 of 52
Details on the Vaddio AutoTrak 2.0 HD-20 Pan/Tilt/Zoom Camera used in the
AutoTrak 2.0 Systems:
Rear View of HD-20
5) RS-232 In & IR Out:
The RS-232 accepts modified Canon control protocol for camera control.
6) DIP Switch Settings:
Settings for IR remote, baud rate, SD output format, image flip can be configured on these switches. See
Pages 40-41 for additional information switch settings.
④
①
②
③
Camera Features:
1) Camera/Sensor/Optics:
6.49mm diagonal (1/2.8-Type) high speed CMOS
image sensor with 3.27M pixels is combined with
a 20x optical zoom lens for capturing truly
precise and clean HD video.
2) Tally Light:
For the Tracking Camera, in this case the HD-20,
the tally light is not used.
3) IR Sensors:
IR sensors are built into the front of the
WallVIEW HD-20 to receive IR signals from the
IR remote control supplied with the camera.
4) Power Light:
A blue power light is illuminated when the
camera is turned on.
Front View of Vaddio HD-20
HD PTZ Camera
⑤
⑥
⑧
⑦
⑨
⑫
⑩
⑪