Instruction Manual

AV Bridge CONFERENCE
Vaddio AV Bridge CONFERENCE - Document Number 342-0767 Rev A Page 11 of 32
Network Settings
The Network settings is a “read only” message representing the current IP addresses defined for the AV Bridge
CONFERENCE by the webpages. Properties displayed include:
Mac Address:
IP Address:
Subnet Mask:
IP Gateway:
Net Type: DHCP
Hotkey Buttons and Indicators
A number of common user controls have been included on the front panel for quick access by the user during a
streaming session. Dedicated controls and indicators include:
Video Mute:
Stops the video input source from being sent to the Host PC and replaces with a color bar image. The Video
Mute button will be backlit Red when in mute state.
Audio Mute: This button mutes the input audio source being sent to the Host PC. The Audio Mute button
will be backlit in red when in mute state.
Audio Level: A rotary control with 10 steps (but goes to 11) allows the user to adjust the audio input level
being sent to the Host PC. A visual volume level is presented on the LCD to provide feedback of the current
audio level. (Note: This level is not the same as the PC’s record channel volume controls.) The audio
ladder will show a relative volume level as it is adjusted however, after it shows that level for a few seconds it
will act as a VU meter.
Video Input LED:
A visual LED indicator represents the current video source being sent to the Host PC. The selected source is
indicated with a blue LED.
Audio Input LED:
A visual indication of current audio input source being sent to the Host PC. The selected source is indicated
with a blue LED.
Web Page Screen Shot Tour:
Screen Shot: Login
The AV Bridge CONFERENCE web server is an administrator’s management tool and requires authentication for
access.
The user account name is: admin
The default password is: password
The user account and password can be changed after the initial login.