Operating Owner's manual

ManualsBrandsVaddio ManualsAudioBRC-H900

Overview

Location and Function of Parts

1 Switch 1, 2 (signal format selector)

Depending on the setting of the Switch 1, 2, the

signal format is changed as follows:

2 Switch 3 (RS-232C/RS-422 selector)

Set to ON for RS-422, or OFF for RS-232C.

3 Switch 4 (Communication baud rate selector)

Set to ON for 38,400 bps, or OFF for 9,600 bps.

4 Switch 1, 2, 3 (Camera address selectors)

Set the address of the camera.

Normally set to “0”. With this setting, addresses are

assigned to the cameras automatically in the

connected order by pressing the POWER button

while holding down the RESET button on the RM-

BR300 Remote Control Unit.

You can assign the camera address “1” to “7”

manually by setting these selectors as follows:

5 Switch 4 (Infrared signal output switch)

Set to ON to enable an infrared signal output, or

OFF to disable the output. For details about the

output connector, see “Pin Assignments” on page

85.

Note

Set the switches before you turn on the power of the

camera. The switch 4 (Infrared signal output switch)

setting is effective whenever you change its setting.

Remote Commander (supplied)

A CAMERA SELECT buttons

Press the button corresponding to the camera you

want to operate with the Remote Commander.

The camera number can be set using the IR

SELECT switch on the rear of the camera.

Note

If two or more cameras are adjacent and have the

same camera number, they are operated

simultaneously with the same Remote Commander.

When you install the cameras close to each other,

set different camera numbers.

For the camera number setting, see “Operating

Multiple Cameras with the Remote Commander”

on page 45.

B FOCUS buttons

Used for focus adjustment.

Press the AUTO button to adjust the focus

automatically. To adjust the focus manually, press

the MANUAL button, and adjust it with the FAR

and NEAR buttons.

Signal

format

1080/

59.94i

1080/50i 720/

59.94p

720/50p

Switch 1 OFF ON OFF ON

Switch 2 OFF OFF ON ON

Camera

address

01234567

Switch 1 OFF ON OFF ON OFF ON OFF ON

Switch 2 OFF OFF ON ON OFF OFF ON ON

Switch 3 OFF OFF OFF OFF ON ON ON ON

POWER

CAMERA SELECT

AUTO

POSITION

HOME

RM-EV100

RESET

PRESET

STD REV

BACK LIGHT

MANUAL

FAR

FOCUS

NEAR

123

456

PAN-TILT

SLOW FAST

ZOOM

L/R

DIRECTION SET

PAN-TILT

RESET

DATA SCREEN