Operating Owner's manual
Installation and Connections
Installation
GB
62
7
Secure the ceiling brackets (A) and (B) using the
supplied three screws (3M3 × 8).
8
Connect the cables to the connectors on the rear of
the camera.
Notes
• Take the proper steps and make sure that the
weight of the connected cables does not strain the
connectors.
• For details about the supplied AC power cord and
DC-cord secure connection attachment, see
“Connections” on page 63.
To remove the camera
1
Remove the three screws used to attach the camera
in step 7 of “Installation on a shelf, etc., in a high
position (example).”
2
Turn the camera with the bracket clockwise to
remove.
3M3 × 8
(supplied)