Operating Owner's manual

Installation and Connections

Connections

Notes

• When the connection using the Optical Fiber Cable is

made, the VISCA RS-232C and VISCA RS-422

connectors on the camera cannot be used.

• When using the VISCA RS-232C connectors or

VISCA RS-422 connectors, check the VISCA

FUNCTION switch on the rear of the Optical

Multiplex Unit (page 26) and the DIP switch on the

bottom of the Remote Control Unit (page 24) are set

to RS-232C or RS-422 correctly.

Notes on use of the CCFC-S200 HD Optical

Fiber Cable

• In order to prevent cable transmission loss, keep away

bend in the cable more than 40 mm (1 5/8 inches)

radius.

• To connect two Optical Fiber Cables, use the

extension plug supplied with the cable.

BRC-H900

CCFC-S200

Keep more than

40 mm (1 5/8

inches) radius.

BRU-SF10

CCFC-S200

Extension plug