Programmers User Manual

116
13.54 Infrared Cut Filter Status Request Camera Control Command Type 1
Function Returns the setting status of the infrared cut filter.
Command 00B6h
Parameter None
Length 1 byte
Filter inserted status : 1h
Status
Value
Filter not inserted status : 0h
Under the Filter movement : 2h
Reference •Infrared cut filter status is returned as a one-digit hexadecimal number.
 Format of Control Code
d0 d1 d2 d3 d4 d5
Header Device Num Command End mark
FFh 30h 3Xh 00h B6h EFh
 Answer Format
 No Error
d0 d1 d2 d3 d4 d5 d6
Header Device Num Error Code Status End mark
FEh 30h 3Xh 30h 30h s0 EFh
⇓
The setting value is expressed as a one-digit hexadecimal number with the ASCII
code as a status value.
s0
Inserted status: 1h ⇒ 31h
Not inserted status: 0h ⇒ 30h
 Generated Error
d0 d1 d2 d3 d4 d5
Header Device Num Error Code End mark
FEh 30h 3Xh e0 e1 EFh
⇓
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value
Example: e0 e1
 In case of Mode Error : 10010000B ⇒ 90h ⇒ 39h 30h
 Condition of Error flag to be set
Mode Error •Not in status of Camera ON
•Not in status of Host Control Mode