Programmers User Manual

120
13.58 Noise Reduction Low Level ON Camera Control Command Type 2
Function Sets the noise reduction to low level ON.
Command 00B9h
Length 1 byte Parameter
Value 1h
Status None
Reference
 Format of Control Code
d0 d1 d2 d3 d4 d5 d6
Header Device Num Command Parameter End mark
FFh 30h 3Xh 00h B9h 31h EFh
 Answer Format
d0 d1 d2 d3 d4 d5
Header Device Num Command End mark
FEh 30h 3Xh e0 e1 EFh
⇓
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value
Example: e0 e1
 In case of No Error : 00000000B ⇒ 00h ⇒ 30h 30h
 In case of Parameter Error : 01010000B ⇒ 50h ⇒ 35h 30h
 In case of Mode Error : 10010000B ⇒ 90h ⇒ 39h 30h
 Conditions for setting of error flag
Parameter Error •In case of assigned parameter illegal
Mode Error •Not in status of Camera ON
•Not in status of Host Control Mode
•Camera is set to Slow Shutter