Programmers User Manual

158
14.27 Cascade OFF System Control Command Type 1
Function To release Cascade Connection OFF.
Command 008Fh
Length 1 byte Parameter
Value 0h
Status None
Reference •Cascade connection status comes out OFF by default at the moment of
power ON.
•Multiple VC-C50i's unable to control in status of cascade OFF.
•Device number of this command is only "3030h"
•Usable device number in cascade OFF, is only "3030h"
•Cascade ON/OFF commands are effective for all VC-C50i connected even
in a cascade OFF status.
•To force to stop Pan/Tilt operation by this command except operating
pedestal initialize.
•Necessary to issue this command before issuing Cascade ON
command (14.28).
 Format of Control Code
d0 d1 d2 d3 d4 d5 d6
Header Device Num Command Parameter End mark
FFh 30h 30h 00h 8Fh 30h EFh
 Answer Format
d0 d1 d2 d3 d4 d5
Header Device Num Error Code End mark
FEh 30h 30h e0 e1 EFh
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value.
Example: e0 e1
 In case of No Error : 00000000B ⇒ 00h ⇒ 30h 30h
 In case of Mode Error : 10010000B ⇒ 90h ⇒ 39h 30h
 Condition of Error flag to be set
Mode Error •In case of operating MENU by Local Mode.