Programmers User Manual

68
13.9 One Push AF Camera Control Command Type 2
Function To set manual mode after changing Mode to AF and getting focus.
Command 00B1h
Length 1 byte Parameter
Value 1h
Status None
Reference •Flags in Focusing of Operation Status Request in AF mode comes out
zero and Manual Focus come out 1 after getting in focus.
•To return notification at the moment of setting command termination
notification ON
 Format of Control Code
d0 d1 d2 d3 d4 d5 d6
Header Device Num Command Parameter End mark
FFh 30h 3Xh 00h B1h 31h EFh
 Answer Format
d0 d1 d2 d3 d4 d5
Header Device Num Error Code End mark
FEh 30h 3Xh e0 e1 EFh
⇓
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value.
Example: e0 e1
 In case of No Error : 00000000B ⇒ 00h ⇒ 30h 30h
 In case of Busy : 00010000B ⇒ 10h ⇒ 31h 30h
 In case of Mode Error : 10010000B ⇒ 90h ⇒ 39h 30h
 Condition of Error flag to be set
Busy •In process of camera initializing operation by Camera Reset
command, etc.
•In process of focus operation by manual.
•In process of One Push AF operation.
•In case of executing Preset Move command.
Mode Error •Not in status of Camera ON.
•Not in status of Host Control Mode.