Programmers User Manual

13.27 AE Lock OFF Camera Control Command Type 1

Function To cancel AE Lock ON status.

Command 00A5h

Length 2 byte Parameter

Value 40h

Status None

Reference •To set auto exposure mode ON.

•Default value is set at the moment of executing Camera Reset and Camera

ON command during power ON.

 Format of Control Code

d0 d1 d2 d3 d4 d5 d6 d7

Header Device Num Command Parameter End mark

FFh 30h 3Xh 00h A5h 34h 30h EFh

 Answer Format

d0 d1 d2 d3 d4 d5

Header Device Num Error Code End mark

FEh 30h 3Xh e0 e1 EFh

⇓

Error Flag indicates in 2 figures hexadecimal and returns ASCII code value.

Example: e0 e1

 In case of No Error : 00000000B ⇒ 00h ⇒ 30h 30h

 In case of Busy : 00010000B ⇒ 10h ⇒ 31h 30h

 In case of Mode Error : 10010000B ⇒ 90h ⇒ 39h 30h

 Condition of Error flag to be set

Busy •In process of camera initializing operation by Camera Reset

command, etc.

•In status of exposure mode manual.

•In case of executing Preset Move command.

Mode Error •Not in status of Camera ON.

•Not in status of Host Control Mode.