Programmers User Manual

90
13.31 Shutter Speed 1/100 (PAL:1/120) Camera Control Command Type 2
Function To change shutter speed to 1/100 (PAL: 1/120) mode.
Command 00A8h
Length 1 byte Parameter
Value 2h
Status None
Reference •To be able to lower flicker.
•To receive command at the moment of exposure mode auto.
•To return notification at the moment of setting command termination
notification ON, when operation terminates. But not return notification of
Shutter Speed 1/100 command, in case of executing Shutter Speed
Program, Shutter Speed 1/60 during operation.
 Format of Control Code
d0 d1 d2 d3 d4 d5 d6
Header Device Num Command Parameter End mark
FFh 30h 3Xh 00h A8h 32h EFh
 Answer Format
d0 d1 d2 d3 d4 d5
Header Device Num Error Code End mark
FEh 30h 3Xh e0 e1 EFh
⇓
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value.
Example: e0 e1
 In case of No Error : 00000000B ⇒ 00h ⇒ 30h 30h
 In case of Busy : 00010000B ⇒ 10h ⇒ 31h 30h
 In case of Mode Error : 10010000B ⇒ 90h ⇒ 39h 30h
 Condition of Error flag to be set
Busy •In process of camera initializing operation by Camera Reset
command, etc.
•In status of exposure mode manual.
•In status of AE Lock ON.
•In case of executing Preset Move command.
Mode Error •Not in status of Camera ON.
•Not in status of Host Control Mode.