Manual

CeilingVIEW HD-18 DocCAM Series

CeilingVIEW HD-18 DocCAM Manual - Document Number 342-0195 Rev. B 15 of 24

CeilingVIEW HD-18 DocCAM Connectors and Pin-out Detail:

The connections on the top of the camera enclosure are as follows:

1) One (1) RJ-45 connector for RS-232 communication and IR Out

2) One (1) RJ-45 connector for Power/Video to be connected to the Quick-Connect HD-18 SR or Quick-Connect

DVI/HDMI SR Interface.

x RS-232/IR OUT RJ-45:

This jack provides for RS-232 bi-directional control and IR Out for IR Forwarding of 3

party IR Remotes to

control codecs. Generally, the main camera in a system may have the requirement for IR Forwarding, but for

added flexibility, the CeilingVIEW HD-18 also can forward the IR commands from other IR Remotes (for

example Polycom, LifeSize and Cisco/TANDBERG C-Series codec remotes).

Pin Function

1) Unused

2) Unused

3) Unused

4) IR Output (Diff Signal to Quick-Connect)

5) IR Ground (Diff Signal to Quick-Connect)

6) GND

7) RXD (from TXD of control source)

8) TXD (to RXD of control source)

x Power/Video RJ-45:

The Power/Video Port supplies power to the CeilingVIEW HD-18 DocCAM and returns HSDS (differential HD

Video) up to 100’ (30.5m).

Pin Function

1) Power+

2) Power-

3) Y+

4) PB+

5) PB GND

6) Y GND

7) PR+

8) PR-

12345678