Owner's manual

ManualsBrandsVaddio ManualsAudioCeilingVIEW HD HideAway

CeilingVIEW HD HideAway Manual

CeilingVIEW HD HideAway Manual, Document Number 342-0289 Rev. B Page 16 of 24

G. End the Calibration Mode in the CeilingVIEW HD HideAway: Press and hold the Calibration push button

on the IR Circuit Board in the Trim Ring until the Blue Power light stops flashing and becomes steady blue.

Vaddio IR Remote Commander: Setting the Upper and Lower Lift Stops

Note: The CeilingVIEW HD HideAway must be in the Calibration mode in order to set the Upper and Lower Lift

Stops.

Figure 26: Vaddio IR Remote Commander

Power On: Lowers the

CeilingVIEW HD HideAway and

turns on the Vaddio HD PTZ

Camera.

Power Off: Raises the

CeilingVIEW HD HideAway and

turns off the Vaddio HD PTZ

Camera.

Back Light

Compensation On/Off:

Sets the Lower Lift Stop

Data Screen:

Sets the Upper Lift Stop

Select IR Frequencies:

Select the same IR Setting that

the CeilingVIEW HD HideAway

and Vaddio HD PTZ Camera

have been set to (1, 2 or 3).

Pan/Tilt Left: Moves the

lift

down slowly

Pan/Tilt Up: Moves the

lift

up quickly

Pan/Tilt Right: Moves

the lift

up slowly

Pan/Tilt Down: Moves the

lift

down quickly

Figure 24:

CeilingVIEW HD

HideAway Lower

Lift-Stop Position

Align the upper

décor plate to the

Trim Ring

Figure 25:

CeilingVIEW HD

HideAway Upper

Lift-Stop Position

Align the lower

decor plate to the

Trim Ring

Lower Lift-Sto

Position

er Lift-Sto

Position