User guide

CeilingVIEW SD CCU
Vaddio CeilingVIEW SD CCU Installation and User Guide - Document 341-769 Rev. A
Page 11 of 16
Technical Specifications:
CeilingVIEW SD CCU
Part Numbers 999-2009-000 (NTSC), 999-2009-001 (PAL)
Image Sensor Sony ¼” EXview HAD CCD
Effective Pixels (NTSC) 380K Pixels
Effective Pixels (PAL) 440K Pixels
Horizontal Resolution 470 TVL (NTSC), 460 TVL (PAL)
Min. Illumination 1/60 s mode: 1.4 Lux typical (F1.6, 50 IRE) / 1/4 s mode: 0.1 Lux typical (F1.6, 50 IRE)
Lens 36X optical zoom, f=3.4 mm (wide) to 122.4 mm (tele), F1.6 to F4.5
Digital Zoom 12X (432X Total Zoom)
Angle of View (H) 57.8 degree (wide end) to 1.7 degree (tele end)
CeilingVIEW SD Image Sizes -
• 36X Optical Zoom
• Std. Resolution - Aspect Ratio 4:3
• Ceiling Height of 9'
• Distance to table top 6.5'
• Wide End (zoomed out) measurement = 86" x 64.5"
• Tele End (zoomed in) measurement = 2.3" x 1.7"
Video Outputs VBS:1.0 Vp-p (Sync Negative) & Y/C Output
S/N Ratio More than 50 dB
Focusing System Full Auto, Manual
Min. Working Distance 320mm (wide end), 1500mm (tele end)
Sync System Internal
Picture Effects E-Flip, Negative Art, Black & White, Mirror Image
Camera Control
• RS-232 (VISCA™, baud rate: 9.6 Kb/s, 1-stop bit)
• IR - Responds to Vaddio IR Remote (full functionality), Polycom and TANDBERG IR ZOOM IN
and ZOOM OUT commands automatically.
• With dip switch control (#2 UP), Polycom and TANDBERG “PAN RIGHT” command can activate
the Laser Pointer “MOMENTARY ON” command for document positioning
• Camera Enclosure
Components Camera Enclosure, White Trim Ring, Mounting Rails and Mounting Hardware
Connectors
One (1) RJ-45 for Video and Power
One (1) RJ-45 for RS-232
Camera Enclosure Dimensions 4.85” x 5.75” x 5.75” (H x W x D),
Camera Enclosure Weight 2.4lbs
• Quick-Connect CV HD/SD
Connectors
One (1) RJ-45 for Video and Power
3-BNC: Analog SD (Y/C and composite) Outputs
Note: The CeilingVIEW SD has only Y/C and Composite Video Outputs
5.5mm OD x 2.5 ID Power Connector
Controls
Y-Gain Adjustment
Distance Adjustment (for longer Cat. 5 cable runs)
Max Cat. 5 Cable Distance 400’/121.92m between Quick-Connect CV HD/SD and Camera Enclosure
Quick-Connect CV HD/SD Dimensions 1.75” x 5.5” x 3.0” (3.75” with BNC connectors) (H x W x D) 1/3-Rack Width
Quick-Connect CV HD/SD Weight 1.0lbs
Power Supply 24VDC, 2A
Accessories 999-6000-002 Rack Mount Adapter Panel for 1/3-Rack Quick-Connect Interface
• Quick-Connect CCU Interface (QCCU)
Connectors Power Connector: 36VDC 5.5mm OD x 2.5mm ID
Power RJ-45: Not applicable with CeilingVIEW CCU
Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems
Control Out RJ-45: Passes RS-232 and Sync video feed to camera EZIM
Tally: 2-Pin Phoenix type spring cage connector
Video Inputs: Not applicable with CeilingVIEW CCU
Video Outputs: Not applicable with CeilingVIEW CCU
Video RJ-45: Not applicable with CeilingVIEW CCU
Camera Feature Dip Switch For Future Functionality – Leave all switches in the down position
Video Adjustments Unused on the Quick-Connect CCU – Make adjustments on the Quick-Connect CV HD/SD
Power Supply 36 VDC, 2.08 Amp
Dimensions 1-RU Rack Mount - 1.75” H x 19” W x 6” D (4.45 cm x 4.26 cm x 15.24 cm)