User guide

CeilingVIEW SD CCU
Vaddio CeilingVIEW SD CCU Installation and User Guide - Document 341-769 Rev. A
Page 13 of 16
Appendix 1:
Building Code Compliance
Camera Enclosure:
The Camera Enclosure for the new CeilingVIEW SD
features threaded inserts to attach a 1-gang conduit
box over the 2-Cat.5 connectors. This is for use in
areas of the country with strict building codes
pertaining to plenum air space (i.e. Chicago, NYC,
etc.) and use of conduit. The RJ-45 connectors for
Power/Video and Control are located to fit within the
foot print of a 1-gang junction box.
Appendix 2:
Video, Power and Control Pin-outs for the Camera Enclosure
Power/Video on RJ-45 Jack
(Figure 8)
# Pins
SD VIDEO
1) Power (+)
2) Power GND
3) Y+
4) C+
5) C-
6) Y-
7) Comp. Video +
8) Comp. Video -
RS-232 on RJ-45 Jack
(Figure 9)
# Pins
1) DSR
2) DTR
3) Unused
4) Unused
5) Unused
6) Digital GND
7) RXD (from TXD of control source)
8) TXD (to RXD of control source)
12345678
12345678
Figure 9:
RS-232C Control on RJ-45
Figure 8:
Power/Video on RJ-45
For Last in line Daisy Chain
Figure 7:
CV Enclosure with threaded
inserts to attach a conduit
box to the outside of the
CeilingVIEW SD Enclosure