INSTALLATION AND USER GUIDE VADDIO™ CLEARVIEW™ HD-19 High Definition Integrated Robotic PTZ Camera Arctic White Version Part Number 999-6940-000AW (North America) Part Number 999-6940-001AW (International) Black Version Part Number 999-6940-000 (North America) Part Number 999-6940-001 (International) ©2011 Vaddio - All Rights Reserved ● ClearVIEW HD-19 ● Document Number 342-0259 Rev.
ClearVIEW HD-19 Inside Front Cover - Blank ClearVIEW HD-19 Manual 342-0259 Rev.
ClearVIEW HD-19 Overview: The Vaddio™ ClearVIEW HD-19 high definition integrated robotic PTZ camera features a 19X optical zoom lens and is built around a 1/3-Type progressive scan, high-speed, low noise CMOS image sensor with a total of 1.3 Megapixels for precise and vibrant HD color video images. The HD-19 uses an increased pixel aperture size, high signal to noise and column-parallel A/D conversion method to create images containing more detail than ever before.
ClearVIEW HD-19 Unpacking: Carefully remove the device and all of the parts from the packaging. Unpack and identify the following parts in 999-6940-000: One (1) ClearVIEW HD-19 HD Camera One (1) Vaddio IR Remote Commander One (1) EZCamera™ Control Adapter (RJ-45 to DB-9) One (1) Vaddio PowerRite™ 12 VDC, 3.
ClearVIEW HD-19 ClearVIEW HD-19 PTZ Camera, Rear View with Feature Call-outs: ⑤ ⑥ ⑨ ⑩ ⑦ ⑪ ⑧ ⑫ 5) RS-232 IN & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the IR receivers, which can be transmitted to third party devices. 6) Dip Switch Settings: Settings for IR remote, baud rate, SD output format, and image flip can be configured on these switches. See page 5 for additional information on switch settings.
ClearVIEW HD-19 First Time Set-up with the ClearVIEW HD-19: The ClearVIEW HD-19 was designed to be exceptionally easy to use and operate. There is documentation at the back of the manual for pin-outs for all of the connectors on the ClearVIEW HD-19 camera. Getting Started Step 1: Using the HD Video Select Rotary Switch and Camera Settings Dip Switch on the back of the camera, set up the camera’s output resolution and functional preferences.
ClearVIEW HD-19 Basic Connectivity Example of the HD-19 PTZ camera to a Vaddio Joystick Controller, Codec and Monitors: Rear of ClearVIEW HD-19 12VDC, 3.
ClearVIEW HD-19 Compliance and CE Declaration of Conformity - ClearVIEW HD-19 Compliance testing was performed to the following regulations: FCC Part 15, Subpart B ICES-003, Issue 4: 2004 EN 55022 A: 2006 + A1: 2007(CISPR 22:2005/A1:2005) AS/NZS CISPR 22: 2009 + A1: 2010 VCCI V-3/2010.
ClearVIEW HD-19 Warranty Information: (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice of such defects during the warranty period, they will, at their option, repair or replace products that prove to be defective.
ClearVIEW HD-19 General Specifications: ClearVIEW HD-19 High Definition PTZ Camera Part Numbers ClearVIEW HD-19 North America 999-6940-000 (Black), 999-6940-000AW (Arctic White) ClearVIEW HD-19 International 999-6940-001(Black), 999-6940-001AW (Arctic White) Image Sensor 1/3-Type Exmor High-speed, Progressive Scan CMOS Sensor with 1.3 Megapixels Video Output Resolutions HD: 1080p/60/59.94/50/30/25, 1080i/59.94/50, 720p/59.
ClearVIEW HD-19 EZCamera Power & HD Video RJ-45 Connector Pin-outs Important Note: The EZCamera Power and HD Video RJ-45 Connector is for use with either the Quick-Connect SR Interface or the Quick-Connect DVI/HDMI SR Interface ONLY (568B Wiring Standard). The video signals are differential (HSDS™) and can only be received by the interfaces above.
ClearVIEW HD-19 Appendix 3: Communication Specification Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control 12345678 Pin # 1) 2) 3) 4) 5) 6) 7) 8) RJ-45 RS-232 and IR Out Pins Unused Unused Unused IR Output (Diff Signal to Quick-Connect SR) IR Ground (Diff Signal to Quick-Connect SR) GND (GND of IR Short Range - Pin 3) RXD (from TXD of control source) TXD (to RXD of control source) NOTE: The Vaddio ClearVIEW HD-19 Control Protocol is similar, but n
ClearVIEW HD-19 HD-19 Command List (2/2) Command Set Command CAM_Backlight CAM_Aperture CAM_Memory CAM_IDWrite IR_Receive Pan-tiltDrive Tally Preset Pan Speed Motor Config BLK.Enhance GMA.Enhance CRM.Enhance KNE.Enhance DIS.Enhance SNR.Enhance AGC.
ClearVIEW HD-19 HD-19 Inquiry List (1/1) Inquiry Command Command Response Packet Comments 8x 09 06 11 FF y0 50 02 FF y0 50 03 FF y0 50 0p 0q 0r 0s FF y0 50 0p 0q 0r 0s FF y0 50 00 FF y0 50 05 FF y0 50 03 FF y0 50 00 00 0p 0q FF y0 50 00 00 0p 0q FF y0 50 00 00 0p 0q FF y0 50 00 00 0p 0q FF y0 50 00 00 0p 0q FF y0 50 02 FF y0 50 03 FF y0 50 00 00 0p 0q FF y0 50 0p FF y0 50 0p 0q 0r 0s FF y0 50 02 FF y0 50 03 FF y0 50 pp qq FF Pan-tiltPositionInq 8x 09 06 12 FF FF y0 50 0p 0p 0p 0p 0q 0q 0q 0q FF Tal
ClearVIEW HD-19 Appendix 3 (continued): Iris Position: Index 0x11 0x10 0x0F 0x0E 0x0D 0x0C 0x0B 0x0A 0x09 0x08 0x07 0x06 0x05 0x04 0x03 0x02 0x01 0x00 Gamma Position: Index 0x10 0xF 0xE 0xD 0xC 0xB 0xA 0x9 0x8 0x7 0x6 0x5 0x4 0x3 0x2 0x1 0x0 F-Stop (Iris Position) F1.6 F2.0 F2.4 F2.8 F3.4 F4.0 F4.8 F5.6 F6.8 F8.0 F9.6 F11.0 F14.0 F16.0 F19.0 F22.0 F28.0 Close Gamma value 1.00 0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60 0.55 0.50 0.45 0.40 0.35 (Default) 0.30 0.25 0.20 ClearVIEW HD-19 Manual 342-0259 Rev.
ClearVIEW HD-19 9433 Science Center Drive, Minneapolis, MN 55428 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2011 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, ProductionVIEW, ClearVIEW, Quick-Connect, EZCamera, AutoPresenter, HSDS and PowerRite are registered trademarks of Vaddio.
