Installation and User Guide VADDIO™ CLEARVIEW™ HD-20SE QDVI SYSTEM ClearVIEW HD-20SE High Definition, Robotic PTZ Camera featuring the Quick-Connect™ DVI/HDMI System Interface Model Number 999-6986-000 (North America) Model Number 999-6986-001 (International) Model Number 999-6986-000AW (North America) Arctic White Camera Model Number 999-6986-001AW (International) Arctic White Camera Quick-Connect DVI-HDMI-SR Interface Part Number: 998-1105-018 © 2015 Vaddio - All Rights Reserved.
ClearVIEW HD-20SE QDVI SYSTEM TABLE OF CONTENTS Overview .................................................................................................................................................................... 3 Unpacking: ................................................................................................................................................................. 4 Anatomy of the ClearVIEW HD-20SE HD PTZ Camera .................................................................
ClearVIEW HD-20SE QDVI SYSTEM OVERVIEW: The amazing ClearVIEW HD-20SE HD PTZ Camera quite literally combines all of the best features of the ClearVIEW HD18, HD-19 and HD-20 HD PTZ cameras into ONE! The innovation of the HD-18 EZCamera™ Cat-5 interfaces, the low light capability of the HD-19 and the FULL HD performance of the HD-20 are all represented, and improved upon with the ClearVIEW HD-20SE. The ClearVIEW HD-20SE is clearly the best ClearVIEW ever, and here’s why.
ClearVIEW HD-20SE QDVI SYSTEM Save These Instructions: The information contained in this manual will help you install and operate your product. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from www.vaddio.com free of charge. UNPACKING: Carefully remove the product and all of the included parts from the packaging.
ClearVIEW HD-20SE QDVI SYSTEM ANATOMY OF THE CLEARVIEW HD-20SE HD PTZ CAMERA Image: Front View ClearVIEW HD-20SE ① ② ③ ④ 1) Camera and Zoom Lens: The 20X optical zoom lens is built around a (1/2.8 Type) high-speed, low-noise Exmor CMOS image sensor with a total of 2.38 total megapixels for precise HD video image acquisition. 2) Red Tally Light: A red tally light is illuminated when the camera receives a command from an external control system.
ClearVIEW HD-20SE QDVI SYSTEM Image: Rear View ClearVIEW HD-20SE Connectors ⑤ ⑥ ⑦ ⑨ ⑩ ⑪ ⑧ ⑫ 5) RS-232 IN & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the IR receivers, which can be transmitted to third party devices (color coded blue). 6) Dip Switch Settings: Settings for IR remote, baud rate and image flip can be configured on these switches. See the Switch Settings page for additional information.
ClearVIEW HD-20SE QDVI SYSTEM FIRST TIME SET-UP WITH THE CLEARVIEW HD-20SE: The ClearVIEW HD-20SE was designed to be a high quality camera that is very easy to use and operate. There is documentation at the back of this manual for pin-outs of the connectors on the ClearVIEW HD-20SE camera. Step 1: Using the HD VIDEO SELECT rotary switch and CAMERA SETTINGS dip switches on the back of the camera, set up the camera’s output resolution and functional preferences.
ClearVIEW HD-20SE QDVI SYSTEM QUICK-CONNECT DVI/HDMI SR INTERFACE Image: Rear Panel Connectors and Features ① ② ③ ④ ⑤ ⑥ ⑦ ⑨ ⑩ ⑧ 1) Power Light: Blue LED Power Indicator 2) 24 VDC Power Port: Coax Power Connector, 5.5mm OD x 2.5mm ID, Positive Center. 3) Recessed Color Space Conversion Switch: Toggles between HDMI (YCbCr) and sRGB (RGBHV) color space. Change the color space on the camera and the Quick-Connect to accommodate either HDMI or DVID monitors.
ClearVIEW HD-20SE QDVI SYSTEM Image: Basic Connectivity Example (QDVI System) HD-20SE camera connected to Quick-Connect DVI/HDMI-SR Interface, ProductionVIEW™ Precision Camera Controller and Monitor. Power to Camera ► HD Video to QC DVI/HDMI Interface Rear View of ClearVIEW HD-20SE CONCEAL Mount Not Shown Video, Power and Control on two Cat-5e cables up to 100’ (30.
ClearVIEW HD-20SE QDVI SYSTEM INSTALLATION BASICS: The ClearVIEW QDVI System with the CONCEAL was designed for installation on a vertical surface with Cat-5/5e/6 cable connectivity for Video, Power and Control signaling (two Cat-5 cables are required). Installation is simplified in that no custom 8-Pin mini-din cables or expensive plenum coax cables or multi-pin cables are needed and no power outlets are required near the camera bracket.
ClearVIEW HD-20SE QDVI SYSTEM Step 3: Secure the Camera To the CONCEAL Wall Mount Bracket After all cables are attached to the camera, place the camera onto the camera mount and insert the two 1/4”-20 screws into the camera through the two-screw slots in the bottom of the mount. Note: Be sure to align each side of the camera evenly for the best fit prior to tightening the mounting screws. Step 4: Install the CONCEAL Lower Cover Plate Attach the CONCEAL lower cover plate.
ClearVIEW HD-20SE QDVI SYSTEM COMPLIANCE AND CE DECLARATION OF CONFORMITY - CLEARVIEW HD-20SE Compliance testing was performed to the following regulations: FCC Part 15 (15.107, 15.
ClearVIEW HD-20SE QDVI SYSTEM COMPLIANCE AND CE DECLARATION OF CONFORMITY - QUICK-CONNECT DVI/HDMI SR INTERFACE Compliance testing was performed to the following regulations: FCC Part 15, Subpart B ICES-003, Issue 4: 2004 European Standard EN 55022 A: 2006 + A1: 2007(CISPR 22:2005/A1:2005) EMC Directive 2004/108/EC Class A Class A Class A Class A FCC Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15, Subpart
ClearVIEW HD-20SE QDVI SYSTEM WARRANTY INFORMATION (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: Two (2) year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio warrants its manufactured products against defects in materials and workmanship for a period of two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such defects during the warranty.
ClearVIEW HD-20SE QDVI SYSTEM GENERAL SPECIFICATIONS: ClearVIEW HD-20SE, HD PTZ Camera Part Numbers Image Sensor Zoom Field of View Lens Focal Length Minimum Illumination Video Resolutions White Balance Video Output Formats Signal to Noise Ratio Compatible QuickConnects Pan Range Preset Positions Control Methods Tally Light HD Video Select Camera Settings Accessory Slot Cards Dimensions/Weight 999-6986-000 (North America), 999-6986-001 (Int’l) - Black Camera Version 999-6986-000AW (North America), 999-698
ClearVIEW HD-20SE QDVI SYSTEM EZ-Power Video RJ-45 Connector Pin-outs Important Note: The EZ-Power Video RJ-45 Connector is for use with the Quick-Connect SR, QuickConnect DVI/HDMI SR and Quick-Connect USB Interfaces ONLY (568B Wiring Standard). The video signals are differential (HSDS™) and can only be received by the interfaces above.
ClearVIEW HD-20SE QDVI SYSTEM COMMUNICATION SPECIFICATION Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control 12345678 Pin # 1) 2) 3) 4) 5) 6) 7) 8) RJ-45 RS-232 and IR Out Pins Unused Unused Unused IR Output (Diff Signal to Quick-Connect SR) IR Ground (Diff Signal to Quick-Connect SR) GND (GND of IR Short Range - Pin 3) RXD (from TXD of control source) TXD (to RXD of control source) NOTE: The Vaddio ClearVIEW HD-20SE Control Protocol is similar, b
ClearVIEW HD-20SE QDVI SYSTEM HD-20SE Command List (2/2) Command Set Command CAM_Backlight CAM_Aperture CAM_Memory CAM_IDWrite CAM_LR_Reverse On IR_Receive## Pan-tiltDrive Pan-tilt-zoom Drive Tally Preset Pan Speed Motor Config BLK.Enhance GMA.Enhance CRM.Enhance KNE.Enhance DIS.Enhance SNR.Enhance AGC.
ClearVIEW HD-20SE QDVI SYSTEM HD-20SE Command List (2/2) Notes *Zoom and Focus Data: CAM_Zoom: Range(0x000–0x071A) CAM_Focus: Range (0x0ed-0x0944) dependent on Zoom Position **Additional Information: Pan Range: 8044 – 7FBC (-32,700 to +32,700) Tilt Range: E891 – 4C2B (-5,999 to +19,499) Actual Pan/Tilt ranges defined in Inquiry list HD-20SE Inquiry List (1/1) Inquiry Command Command Response Packet Comments 8x 09 06 11 FF y0 50 02 FF y0 50 03 FF y0 50 0p 0q 0r 0s FF y0 50 0p 0q 0r 0s FF y0 50 00 FF y0
ClearVIEW HD-20SE QDVI SYSTEM TABLE: HD-20SE OSD MENU STRUCTURE Use this OSD menu with the IR Commander to make video adjustments (AWB, COLOR, EXP, etc…) on the HD-20SE Camera.
ClearVIEW HD-20SE QDVI SYSTEM HD-20SE OSD Menu Structure (continued) Menu SPECIAL Controls DAY/NIGHT> DIS> DEFOG COMM ADJUST> IMAGE ADJUST> DISPLAY VIDEO OUT FORM Range/Modes COLOR / B/W / AUTO OFF / ON OFF / ON / MANUAL/AUTO BAUD RATE UART RETURN< H-REV ON / OFF V-REV ON / OFF SHARPNESS ON/OFF ON> 0-30 RETURN< MONITOR LCD> GAMMA .0 -1.0 COLOR LEVEL 0-100 RETURN< USER> GAMMA .0 - 1.
ClearVIEW HD-20SE QDVI SYSTEM Inside Back Cover - Mostly Blank ClearVIEW HD-20SE QDVI SYSTEM, Document Number 342-0935 Rev A Page 22 of 23
ClearVIEW HD-20SE QDVI SYSTEM Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2015 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice or obligation. Vaddio, ClearVIEW, ProductionVIEW, EZCamera, Quick-Connect, CONCEAL and HSDS are trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number 342-0935 Rev A, SD: 68503.