User Manual
WallVIEW HD-USB PRO Camera System
WallVIEW HD-USB PRO Camera System Document Number 342-0467 Rev. E Page 27 of 40
TECHNICAL SPECIFICATIONS:
Part Numbers 999-6995-000 North America, 999-6995-001 International
Video Outputs
USB 2.0 (MJPEG)
o Resolution up to 720p/30 USB 2.0 (MJPEG)
o Color Space 4.2.2 or 4.2.0
o Use “HD VIDEO AND USB 2.0 VIDEO SELECT” rotary positions ‘0’ for USB.2.0 Video
H.264 (IP) - Release 2.0.x
o Resolution up to 1080p/30 (H.264)
Analog Component (YPbPr),
o Analog resolutions up to and including 1080p/60 (YPbPr)
CVBS - Analog only
o 480i and 576i (4:3, LB and SQ)
USB Interface Connector: Type-B, USB 2.0 Compliant, Supported Drivers: Standard UVC device (no custom drivers)
Network Interface Connector: RJ-45, 10/100 Base-T, Supported Protocols: RTSP Streaming, HLS Streaming (apple’s variant
of HTTP streaming) - Release 2
H.264 Resolutions
(Release 2.0)
CIF, 640x480 (VGA), 480p, 720p/30 1080p/30 (1080p Ethernet only)
User Control Vaddio IR Remote Commander, On Screen Display for camera set-up, RS-232, Ethernet (web page)
Supported Media Players Windows Media Player, Apple Quick-Time and VLC Media Player
Supported Browsers Internet Explorer 8 & 9, Safari 4 &5, Safari/iOS, Chrome, FireFox
Image Sensor 1/3-Type Exmor High-speed,
Progressive Scan CMOS Sensor with 1.3 Megapixels
Minimum Illumination 0.7 LUX (F1.6, 50IRE)
Lens/ Focal Length 19X Optical Zoom, F=4.5mm wide to 85mm tele (F1.6-F2.9),
Min. Focus Distance 1.0m
Horizontal Viewing Angle 58.1° Wide End to 3.2°
Tele End - 16:9 Format
Pan Range Pan: +170 degrees to -170 degrees, Tilt:
+90 degrees to -30 degrees,
Invertible for Ceiling Mount
Preset Positions 16 (internal), 6 recalled via IR Remote
Power Extension Module
Includes
Power Extension Module with 5.5mm OD x 2.5mm ID coax power connector
24 VDC, 2.08 Amp switching power supply (100V-240V, 50 to 60 Hz) with power cable
Extreme USB 2.0 Extenders
Range 100m (330ft) over CAT-5 (or better) cable
USB device support High-speed devices (480 Mb/s) (USB 2.0) Full speed devices (12 Mb/s) (USB 2.0 & 1.1) Low speed devices
(1.5 Mb/s) (USB 2.0 & 1.1)
USB host support EHCI (USB 2.0) and OHCI/UHCI (USB 1.1)
RX unit USB connector 1 x USB Type-B
TX unit Link connector 1 x RJ45
TX unit Link connector 1 x RJ45
TX unit USB connector 1 x USB Type-A
RX unit dimensions 3.94” x 2.99” x 1.02” (100 mm x 76 mm x 26 mm)
TX unit dimensions 3.94” x 2.99” x 1.02” (100 mm x 76 mm x 26 mm)
TX power consumption 500 mA maximum
RX power consumption Approx. 500 mA (No Load). 1.5A (Full load)
System shipping weight 2.0 lbs. (0.9 kg)
Operating temperature
range
0°C to 50°C
Storage temperature range -20°C to 70°C
Operating humidity 20% to 80% relative humidity, non-condensing
Storage humidity 10% to 90% relative humidity, non-condensing
Regulatory testing FCC (Class B), IC (Class B), CE (Class B)
ESD rating EMC EN-61000-4-2 8kV Contact, 16kV Air
General Information
Operating Temperature 32° to 104° F (0° to 40° C) / 20% to 80% Relative Humidity
Dimensions / Weight 7.81” (198.37mm) H x 6.67” (169.42mm) W x 7.057” (179.25. mm) D / 6.04 lbs. (2.7397kg.)
Software Release
Information
(see release notes)
Release 1.0: Includes USB 2.0 Outputs and Analog Outputs simultaneously on and ready to use. Ethernet
control via an internal web page and upgrading software capability is active.
Release 1.2.0: Improvements, additions to functionality, Telnet control, UC client compatibility and UVC
resolutions.
Release 2.0.0: H.264 activated for IP Streaming over the network port