Manual

ControlVIEW XHD
ControlVIEW XHD Manual 341-917 Rev. C Page 15 of 24
ControlVIEW XHD Menu Structure (continued)
Preset Tilt Speed
>Select
>01 – 20 (default is 15)
Sets Tilt Speed on all cameras between camera presets (20 is fastest)
Preset Zoom Speed
>Select
>00 – 07 (default is 04)
Sets Zoom Speed on all cameras between camera presets (06 is fastest
Cam Search Menu
>Select
>All Ports: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 01: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 02: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 03: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 04: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 05: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
>Port 06: (select search method – Auto, Sony, Canon, Panasonic, No Camera Input)
Notes: When using Panasonic cameras, you must select Panasonic. If there is no camera
connected to the control port of an input, selecting No Camera Input will lower the time of the boot-
up process by not scanning for a camera on those selected inputs.
System Menu
>Select
>Serial Input
>Select
>On or Off
Turns on or off serial input (default is is On)
>Serial Echo
>Select
>On or Off
Turns Serial Echo on or off (default is On)
>Serial Info
>Select
>On or Off
Reports button pushes on front panel to the serial port (default is Off)
>Panel Lights
>Select
>00 through 50
Panel Light Brightness (all lights - 50 is the brightest) (default is 25, off is 00)
>Clear Memory
>Select
>Start
Clears the camera preset memories and sets all parameters to default settings
>Clear Presets
>Select
>Start
Clears Camera Presets Only
>Transition Time
>Select
>0.1 to 4.0 Seconds
Allows user to adjust transition time from menu or through RS-232 (i.e. control systems)
Transition Time is also adjustable from front panel and can be stored in the presets if the
Transition Mode (below) is set to “By Preset”.
>Transition Mode
>Select
>Global
>By Preset
The currently selected transition will switch cameras in Global mode.
In By Preset mode, the selected transition when a preset is stored will by the transition.