Instruction Manual

Vaddio DomeVIEW Outdoor, Environment Pendant Mount Dome Installation and User Guide - Document 341-445 Rev C
Page 2 of 14
UNPACKAGING – SYSTEM COMPONENT LISTS
Carefully remove all parts from the packaging. Unpack and identify the following parts for each product:
999-9200-050 DomeVIEW 50iR Outdoor Pendant Mount Dome System includes:
QTY Description
1 Canon VC-C50iR PTZ camera
1 Canon IR remote control
- Camera bracket for Canon VC-C50iR PTZ camera
3 2” x .375 (50.8mm x 9.525mm) ¼”M to 8-32F Hex shaped stand-offs
1 6.25” x 5.25” (15.87cm x 13.34cm) Camera mounting stage
2 8-32 x .5” Flat head screws (flush mount)
2 8-32 x .5” pan head screws
2 #8 Lock washers for pan head screws
- Outdoor Pendant Mount Dome Enclosure
1 Outdoor Pendant Housing Assembly (white outer shell, black inner shell, safety tethers)
1 Heater/blower fan assembly, mounting platform secured with three 10-32 x .5” flat head screws
1 8.2” (20.8cm) Smoke tinted dome bubble with four (4) attached stainless steel mounting screws
1 1-1/2” NPT Locknut
1 Foam dust plug for 1-1/2” NPT pipe fitting
1 Tube of pipe sealer and proprietary Allen wrench (do not lose this wrench)
- EZCamera Cabling Components
1
50 EZCamera Shoe (998-4411-001)
1
Quick-Connect (998-1105-001)
1
PowerRite Power Supply (451-2750-018) and separate 24 VAC Power supply for the Heater/Blower
999-9200-070 DomeVIEW 70 Outdoor Pendant Mount Dome System includes:
QTY Description
1 Sony EVI-D70C/W PTZ camera (platinum white)
1 Vaddio IR Remote Commander (for Sony cameras)
- Camera bracket for Sony EVI-D70 PTZ camera
3 1.125” x .375 (28.58mm x 9.525mm) ¼”M to 8-32F Hex shaped stand-offs
1 6.25” x 5.25” (15.87cm x 13.34cm) Camera mounting stage
2 8-32 x .5” Flat head screws (flush mount)
1 6.25” x 5.25” (15.87cm x 13.34cm) Camera mounting plate
1 ¼”-20 x ½” Mounting screw (to attach camera to mounting plate)
2 8-32 x .5” pan head screws
2 #8 Lock washers for pan head screws
- Outdoor Pendant Mount Dome Enclosure
1 Outdoor Pendant Housing Assembly (white outer shell, black inner shell, safety tethers)
1 Heater/blower fan assembly, mounting platform secured with three 10-32 x .5” flat head screws
1 8.2” (20.8cm) Smoke tinted dome bubble with four (4) attached stainless steel mounting screws
1 1-1/2” NPT Locknut
1 Foam dust plug for 1-1/2” NPT pipe fitting
1 Tube of pipe sealer and proprietary Allen wrench (do not lose this wrench)
- Vaddio EZCamera Cabling Components
1 EZCamera Cabling Shoe (998-2211-004)
1
Quick-Connect (998-1105-001)
1 PowerRite Power Supply (451-2750-018) and separate 24 VAC Power supply for the Heater/Blower
Use only the power supply (or power supplies) provided with the DomeVIEW
systems. Use of any unauthorized power supply will void any and all warranties.
Do not use “pass-thru” RJ-45 connectors during installation. Use only
standard RJ-45 connectors and test all terminated cables.