Installation and User Guide VADDIO™ DOMEVIEW™ HD WEATHER-RESISTANT PENDANT MOUNT DOME WITH HEATER BLOWER FOR THE VADDIO HD-20, HD-19 AND HD-18 PTZ CAMERAS Part Number: 998-9200-200 (North America) 998-9200-201 (International) ©2011 Vaddio - All Rights Reserved ● DomeVIEW HD Weather-Resistant 12” Dome ● Document Number 342-0188 Rev.
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Overview: The Vaddio 12” DomeVIEW HD Series Dome Enclosures for the ClearVIEW HD-20, HD-19 and HD-18 PTZ cameras are attractive and robust integrated HD security solutions for indoor and light-duty outdoor applications. The DomeVIEW HD Series offers three distinctly different products. In all cases, the cameras are not included. This manual covers the WeatherResistant Outdoor Pendant Dome Enclosure.
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Anatomy of the Weather-Resistant 12” Pendant Mount Dome The enclosure will come partially assembled. 1.5” NPT Pipe Flange: Fits 1.5” NPT pipe or wall mount kit with 1.5” NPT male threads* Rubber gasket to seal between pipe flange and plastic shroud* Three (3) 10-32 x .5” pan head screws attach through back of metal back can to the 2.
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Unpacking: Unpack and identify the following parts for 999-9200-200 or 998-9200-201: DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Enclosure Package includes: One (1) Dome Enclosure Assembly with the following parts: o One (1) 1.5” NPT Pipe Flange o One (1) Rubber Gasket (to seal between pipe flange and plastic shroud) o One(1) UV Protected Plastic Enclosure Shroud o Three (3) 10-32 x .
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Pre-Installation: Before starting the installation of the DomeVIEW HD Weather-Resistant Outdoor Pendant Mount Dome, please read this manual. There are several things to consider before mounting a dome camera enclosure. When locating the dome, consider camera and subject matter viewing angles, lighting conditions, possible line of site obstructions and check for construction challenges where the camera is to be mounted.
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Camera Platform and Heater/Blower Components: When powered up, the fan will run continuously. The heater resistor will turn on at 45° F (7.22222 ºC) to keep the contents warm. Operating range with the heater blower is -10°F to 115°F (-23.3ºC to 46.1ºC). Step 5: Connect the 18/2 cable to the green Phoenix type connector as shown (circuit board is marked +24VDC and GND).
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Step 8: Once the camera is installed in the dome, pull the cable slack back through the pendant extension pipe or curved wall mount. The pan range is ±170°, allowing for flexible camera positioning and presets. IMPORTATNT NOTE: If positioning is critical, purchase a 1.5” NPT jamb nut (not provided) and thread it on to the wall or pipe mount before connecting the camera and mounting the dome.
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome *Vaddio manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry standard practices. 9433 Science Center Drive, Minneapolis, MN 55428 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2011 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited.