Installation and User Guide Installation and User Guide VADDIO™ QUICK-CONNECT™ UNIVERSAL CCU FOR WALLVIEW™ HD-22 AND HD-30 CAMERAS WallVIEW Universal CCU HD-22 Part Numbers: 999-6967-000: 999-6967-001: North America International WallVIEW Universal CCU HD-30 Part Numbers: 999-6977-000: 999-6977-001: North America International Use this manual in conjunction with the PowerVIEW HD-22/30 Installation and User Guide.
WallVIEW Universal CCU HD-22/30 Table of Contents Overview: ................................................................................................................................................................... 3 Intended Use: ......................................................................................................................................................... 3 Important Safeguards: .............................................................................................
WallVIEW Universal CCU HD-22/30 Overview: The WallVIEW Universal CCU system for the PowerVIEW HD-22 and PowerVIEW HD-30 HD Pan/Tilt/Zoom Camera Systems includes the HD-22 or HD-30 PTZ camera, the QuickConnect™ Universal CCU, matching CONCEAL™ camera mount, EZIM CCU Slot Card and accessories (mounting hardware, control adapter).
WallVIEW Universal CCU HD-22/30 Unpacking: Carefully remove the device and all of the parts from the packaging. Unpack and identify the following parts: WallVIEW Universal CCU HD-22, Cat-5 Version Part Number: 999-6967-000, North America One (1) Vaddio PowerVIEW HD-22PTZ Camera (998-6960-000) One (1) Universal CCU Cat-5 for HD-22 or HD-30 with Rack Ears One (1) 36 VDC Switching power supply with power cord for North America One( 1) 2-pin Phoenix-type 5.
WallVIEW Universal CCU HD-22/30 Anatomy of the Universal CCU The Universal CCU interfaces for the PowerVIEW HD-22 and the PowerVIEW HD-30 have very similar control protocols and share the same control keypad. The Universal CCU will automatically sense the camera it is and initialize the firmware for the connected camera. The next section will look at the controls and how they are laid out for easy access.
WallVIEW Universal CCU HD-22/30 Image: Rear Panel Connection and Controls (left to right) Power Supply Input: The Universal CCU uses a 36VDC, 2.78 Amp power supply on a 5.5mm OD x 2.5mm ID coaxial connector. 36 VDC to Camera - RED RJ-45: Power is provided on a Cat-5 cable to EZIM (EZCamera Interface Module) Slot Card. The power is regulated in the camera to 12 VDC RS-232 IN - GREEN RJ-45: RS-232 Input from ProductionVIEW™ console, Precision Camera Controller or other PTZ controller.
WallVIEW Universal CCU HD-22/30 The HD-22 and HD-30 Control Menu Screens The HD-22 and HD-30 have individual firmware that auto loads when the camera is plugged in to the Universal CCU and the CCU is turned on (turn the camera on first). Since most cameras are a bit different, the menus will be slightly different, but the Firmware is the same for the HD-22 and HD-30.
WallVIEW Universal CCU HD-22/30 The Display Menu provides controls for the blue LED display, including Bias (brightness), Display Mode - Normal (negative mode) and Inverted (positive mode) and overall contrast are provided. Put dip switch #5 UP to access this menu, make the adjustment and it is recommended that dip switch #5 is returned to the DOWN position so this menu is no longer seen. Display Menu CAT-5 CCU DSPLY > Bias Contrast HD-22 NORML 1/9 204 Put dip switch #5 UP to access the Display Menu.
WallVIEW Universal CCU HD-22/30 Step 2: System Wiring Follow the sample wiring diagrams for connecting the Cat-5 cables to the camera and Quick-Connect Universal CCU Interface. Additional diagrams are available on the Vaddio website. Connect the camera side as follows: Connect the POWER Cat-5 to the Power RJ-45 on the EZIM CCU Slot Card. Connect the VIDEO Cat-5 to the Video RJ-45 on the EZIM CCU Slot Card.
WallVIEW Universal CCU HD-22/30 Drawing: Basic System Connectivity Wiring Diagram Example: PowerVIEW HD-22 or HD-30 Rear Panel of HD-22 with EZIM CCU Slot Card installed in the bottom row slot. All Universal CCU camera packages are shipped with the EZIM CCU Slot Card. Please see the manuals for each of the cameras for specifics regarding set-up and switch settings. EZIM Slot Card Cat-5 Cables up to 500’ POWER VIDEO RS-232 YPbPr 1080i/59.94 HDMI 1080i/59.
WallVIEW Universal CCU HD-22/30 Optimizing System Performance: Optimizing the CCU settings will help achieve maximum performance from the system. Difficult lighting is one of the most challenging problems video system integrators face. The Vaddio CCU will provide the flexibility to fine tune for variables such as cable length, day/night lighting transitions and lighting color temperature. Adjust Iris and Digital Gain Settings: Disable Auto Iris. Set the Iris to its largest aperture (lowest ‘f’ number).
WallVIEW Universal CCU HD-22/30 Warranty Information: (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: Two (2) year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio warrants its manufactured products against defects in materials and workmanship for a period of two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such defects during the warranty.
WallVIEW Universal CCU HD-22/30 Compliance and CE Declaration of Conformity - Universal CCU and EZIM CCU Compliance testing was performed to the following regulations: FCC Part 15, Subpart B ICES-003, Issue 4: 2004 European Standard EN 55022 A: October 2007 European Standard EN 55024/A2 January 2003 IEC 60950-1:2005 (Second Edition); Am 1:2009 EN 60950-1:2006+A11:2009+A1:2010+A12:2011 EMC Directive 89/336/EC Class A Class A Class A Class A Safety Safety Class A FCC Part 15 Compliance This
WallVIEW Universal CCU HD-22/30 Appendix 1: Cable Pin-outs for the Quick-Connect CCU System Quick-Connect CCU Pin-out Assignments: Power Connector RJ-45 (Red) Pin # Function Pin - 1 Pin - 2 Pin - 3 Pin - 4 Pin - 5 Pin - 6 Pin - 7 Pin - 8 Power + Power Power + Power Power + Power Power + Power - Pairs 1 1 2 3 3 2 4 4 36 VDC TO CAMERA 12345678 RS-232 IN RJ-45 (Green) Pin # Function Pin - 1 Pin - 2 Pin - 3 Pin - 4 Pin - 5 Pin - 6 Pin - 7 Pin - 8 N/A N/A N/A N/A N/A Digital GND RXD (from TXD of co
WallVIEW Universal CCU HD-22/30 Appendix 1 (continued) EZIM Slot Card Pin-out Assignments Power Connector RJ-45 (Red) Pin # Function Pin - 1 Pin - 2 Pin - 3 Pin - 4 Pin - 5 Pin - 6 Pin - 7 Pin - 8 Power + Power Power + Power Power + Power Power + Power - Pairs 1 1 2 3 3 2 4 4 12345678 POWER Video (HSDS-differential) RJ-45 Pin # Function Pin - 1 Pin - 2 Pin - 3 Pin - 4 Pin - 5 Pin - 6 Pin - 7 Pin - 8 N/A N/A Y+ PB+ PB GND Y GND PR+ PR- Pairs Not Used Not Used 2 3 3 2 4 4 Vaddio WallVIEW Unive
WallVIEW Universal CCU HD-22/30 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2012 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, Quick-Connect, ProductionVIEW, HSDS, EZIM, WallVIEW, CONCEAL and PowerVIEW are trademarks of Vaddio. All other trademarks are property of their respective owners.
