Installation and User Guide Camera and Electronic Products for Integrators VADDIO™ PRODUCTIONVIEW™ HD-SDI Camera Control Console with HD/SD-SDI Video Switching, Video Transitions, Up/Down Converting of Inputs and Outputs, Lower Screen Graphics and Automated Control Functionality Model Number 999-5650-000 (NTSC) Model Number 999-5650-001 (PAL) ©2013 Vaddio - All Rights Reserved. ProductionVIEW HD-SDI - Document Number 341-852 Rev.
ProductionVIEW HD-SDI ProductionVIEW HD-SDI-SDI Overview The ProductionVIEW HD-SDI-SDI (Figure 1) incorporates seamless video switching, camera preset control and joystick camera control functionality into one of the most fully featured video consoles on the market today. In addition, ProductionVIEW HD-SDI delivers user selectable HD-SDI or SD-SDI inputs, and will up or down scale the output signal to a variety of resolutions in either HD-SDI or SD-SDI with only one frame of delay.
ProductionVIEW HD-SDI • Camera Auto-Sensing - The ProductionVIEW HD-SDI is capable of auto-sensing each PTZ camera attached. Control codes for the following cameras are built-in: • Vaddio WallVIEW CCU and PRO Series Cameras * • Sony EVI-HD1, & Sony BRC-300, BRC-Z700 & BRC-H700 * • Panasonic AW-HE100 * • Canon BU-45H & BU-50H * Most cameras require an optional SDI card • Video Transitions Video transitions are seamless with exceptional video quality.
ProductionVIEW HD-SDI ProductionVIEW HD-SDI Figure 2): 10 9 8 1 2 3 4 5 6 7 1. Focus and Iris Controls: Focus and Iris can be adjusted from knobs on the console for real-time control of these critical functions, when their respective Auto buttons are turned off. Auto White Balance (AWB) and Backlight Compensation (BLC) functions are also available for compatible PTZ cameras. 2.
ProductionVIEW HD-SDI ProductionVIEW HD-SDI Back Panel I/O and Controls (Figure 3): 18 11 17 12 16 13 14 15 11. Power Input - Note: Use only the 18 VDC, 2.75A power supply provided with the ProductionVIEW HD-SDI. 12. Camera Control Ports on RJ-45 connectors: One camera control port per camera (no daisychaining required). Compatible with Sony, Canon and Vaddio PTZ cameras. See page 3 for details on cameras and camera systems compatible with ProductionVIEW HD-SDI. 13.
ProductionVIEW HD-SDI First Time Set-up with the ProductionVIEW HD-SDI: ProductionVIEW HD-SDI was designed to be exceptionally easy to use and operate right out of the box. All of the Vaddio standards for using video (analog), power and control over Cat. 5 cabling are well documented and are in the manual and available free of charge from the Vaddio website. HD-SDI and SD-SDI video signals need to be transmitted over coax cabling that is capable of handling SDI signals.
ProductionVIEW HD-SDI Figure 4: Sample configuration of a WallVIEW CCU connected to ProductionVIEW HD-SDI, with video, control and tally cabling. WallVIEW CCU H700 with optional HD-SDI Card in camera HD-SDI Coax Cable Power CAT 5 RS-232 CAT 5 Quick-Connect CCU TALLY IN RS-232 Control TALLY OUT HD-SDI ProductionVIEW HD-SDI Optional Accessory – UXHD CrossPoint (999-5690-000) UXHD CrossPoint is a dual input (SD/HD-SDI & analog video), dual output (analog video & SD/HD-SDI) converter.
ProductionVIEW HD-SDI Figure 5: Multiple WallVIEW CCU camera systems and laptop connected to ProductionVIEW HD-SDI, with SDI monitors. A laptop and the program output of ProductionVIEW HD-SDI are connected to the optional UXHD CrossPoint converter for conversion to and from SDI. NOTE: PTZ Cameras below either have SDI accessory cards, or native SDI outputs.
ProductionVIEW HD-SDI Operating the ProductionVIEW HD-SDI: Most of the console functions and controls are easy and intuitive. Over the next few pages there are details on how the different functions operate. Camera Controls The controls that can be used to adjust a PTZ camera are highlighted in the diagram to the right (mechanical functions are in gray, and electronic in blue). ProductionVIEW HD-SDI is shipped with “Select Follow Preview” as the default setting.
ProductionVIEW HD-SDI Wipe, Dissolve or Cut To set up the switcher to transition from the current input selected as the Program output to another input, select a different video signal on the Preview bus. In the example to the right, Program is on Input 1 and Preview is on Input 3. Select the type of effect (wipe, cut or mix) that switcher will use to transition from one input to other.
ProductionVIEW HD-SDI Lower Screen Graphics Preparing to display Lower Screen Graphics on ProductionVIEW HD-SDI, first select your “background” video input (typically a live camera) on the Program bus, and then select the input that has the computer graphics that are to be displayed, on the Preview bus. In the example to the right, the background is Input 1 on Program, and the computer is on Input 6.
ProductionVIEW HD-SDI PIP Display (continued) To display the PIP, press either of the PIP buttons, and the PIP will appear on the screen. Input 3 will now be displayed in a window in the lower left corner of the screen. Changing PIP Size: To change the size of the PIP (small, medium or large), press and hold the PIP Positioning button and ProductionVIEW HD-SDI will toggle through the sizes.
ProductionVIEW HD-SDI ProductionVIEW HD-SDI Menu Structure The ProductionVIEW HD-SDI has an 8-line LCD that displays the system menus. The menus are traversed with the up/down arrows, select and cancel buttons. The menu structure is as follows: 1st Screen ProductionVIEW HD-SDI V01.00.
ProductionVIEW HD-SDI Pan Dir Menu (Pan Direction Menu) >Select >All Ports: Normal or Invert (default is Normal) Inverts the Joystick Pan Direction (Inverted - left = right) >Port 01: Normal or Invert >Port 02: Normal or Invert >Port 03: Normal or Invert >Port 04: Normal or Invert >Port 05: Normal or Invert >Port 06: Normal or Invert >Return to Main >Select Returns to Main Menu Tilt Dir Menu (Tilt Direction Menu) >Select >All Ports: Normal or Invert (default is Normal) Inverts the Joystick Tilt Direction (
ProductionVIEW HD-SDI Cam Search Menu >Select >All Ports: (select search method – Auto, Sony, Canon, Panasonic*, No Camera**) >Port 01: (select search method – Auto, Sony, Canon, Panasonic, No Camera) >Port 02: (select search method – Auto, Sony, Canon, Panasonic, No Camera) >Port 03: (select search method – Auto, Sony, Canon, Panasonic, No Camera) >Port 04: (select search method – Auto, Sony, Canon, Panasonic, No Camera) >Port 05: (select search method – Auto, Sony, Canon, Panasonic, No Camera) >Port 06:
ProductionVIEW HD-SDI >Preset Location >Local >6 InCam 6 Local In “Local” mode, the ProductionVIEW stores all 12 presets internally In “6 InCam 6 Local” mode, the presets 1 through 6 will be stored in the cameras. Presets 7 through 12 will be stored in the ProductionVIEW. Note: The “6 InCam 6 Local” mode allows for switching video sources when cameras are moving to preset locations.
ProductionVIEW HD-SDI Compliance and CE Declaration of Conformity FCC Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
ProductionVIEW HD-SDI Warranty Information: Hardware* Warranty - One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice of such defects during the warranty period, they will, at their option, repair or replace products that prove to be defective.
ProductionVIEW HD-SDI General Specifications: Video Resolutions & Distances* - Inputs Video Resolutions - Outputs HD Resolutions: 1080p – SMPTE 424M – Max. Length: 459.3 ft. (140m) (3Gb/s compliant) 1080i – SMPTE 292M – Max. Length: 754.6 ft. (230m) 720p – SMPTE 292M – Max. Length: 754.6 ft. (230m) HD Resolutions: 1080p – SMPTE 424M 1080i – SMPTE 292M 720p – SMPTE 292M SD Resolutions: 480i – SMPTE 259M – Max. Length: 820.2 ft. (250m) 576i – SMPTE 259M – Max. Length: 820.2 ft.
ProductionVIEW HD-SDI Control Pin-out Table for ProductionVIEW HD-SDI Camera Control Ports 1 through 6 - RS-232 on RJ-45 Connectors: PIN# 1) 2) 3) 4) 5) 6) 7) 8) Signal Unused Unused Unused Unused Unused GND TXD (to RXD of camera) RXD (from TXD of camera) 12345678 API and Programming Language +--------------------------------------------------------------------------+ | Vaddio ProductionVIEW HD-SDI | +--------------------------------------------------------------------------+ | ? - This Menu | +--------
ProductionVIEW HD-SDI Appendix 1: Command Structure Definitions Command AWB BLC Camera CamFolPrv ClearAll Config Cut DefaultCam DspCams ExtTrigger Focus FTB Home IdleRtn Iris JPanDir JPanSpd JTiltDir JTiltSpd JZoomDir JZoomSpd lsgDen LSgSize Mix Move OnCamInit PanSpeed PipLoc Power Preset PresetLoc PrevIn ProgIn Rescan Reset ResetVideo Save Config SerialEcho SerialInfo SetDefault Store SwMode SysMode Take Tally TiltSpeed Version Wipe WipeSel Zoom ZoomSpeed Parameters AWB On/Off(cr) BLC On/Off(cr) Camera [
ProductionVIEW HD-SDI 131 Cheshire Lane, Suite 500, Minnetonka, MN. 55305 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2013 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, ProductionVIEW,, Quick-Connect, WallVIEW, EZCamera and PowerRite are registered trademarks of Vaddio. All other trademarks are property of their respective owners.
