Installation and User Guide PRODUCTIONVIEW™ HD-SDI MV HD-SDI Camera Control Console with Integrated Multiviewer, Touch Screen Control Option, Multi-View Control Panel Layout Options and Expanded I/O Capabilities Part Number 999-5655-000 North America Part Number 999-5655-001 International ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev.
ProductionVIEW HD-SDI MV Inside Front Cover - Blank ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev.
ProductionVIEW HD-SDI MV Overview: The Vaddio™ ProductionVIEW HD-SDI MV Production Switcher with integrated camera controller and multiviewer is a powerful, cost effective and easy to operate platform for live presentation environments. With Vaddio’s revolutionary TeleTouch™ Touch Screen Control Panel (optional, sold separately), production operators can easily see and switch all live video feeds and create “video thumbnails” of preset camera shots with the touch of their finger.
ProductionVIEW HD-SDI MV Optional TeleTouch Touch Screen Control Panel with Multi-View Panel Layout Options: The TeleTouch Touch Screen Control Panel (optional) with the new Multi-View touch screen control panel layout options allows integrators to match the touch screen layout to the number of camera, computer or other video input sources that are connected to the ProductionVIEW HD-SDI MV.
ProductionVIEW HD-SDI MV Multiviewer: The ProductionVIEW HD-SDI MV multiviewer feature eliminates the need for individual preview monitors. The multiviewer output allows the operator to see all live video feeds displayed on a single monitor.
ProductionVIEW HD-SDI MV Camera Auto-Sensing: The ProductionVIEW HD-SDI MV is capable of auto-sensing each PTZ camera attached.
ProductionVIEW HD-SDI MV UNPACKING: Carefully remove the device and all of the parts from the packaging. For 999-5655-000, the North American version, unpack and identify the following parts: One (1) ProductionVIEW HD-SDI MV Camera Control Console One (1) Vaddio PowerRite™ 18 VDC, 2.75 A Switching Power Supply One (1) AC Power Cable One (1) HDMI to DVI-D Adapter Cable 10ft.
ProductionVIEW HD-SDI MV ProductionVIEW HD-SDI MV with Feature Call-outs: ⑩ ⑨ ⑧ ① ② ③ ④ ⑤ ⑥ ⑦ 1. Focus and Iris Controls: Focus and Iris can be adjusted from knobs on the console for real-time control of these critical functions when in manual mode. Auto White Balance (AWB) and Backlight Compensation (BLC) functions are available for compatible cameras. 2. Single Bus or Dual Bus Switching: ProductionVIEW HD-SDI MV can be configured as Program and Preview buses or as discrete video outputs (i.e.
ProductionVIEW HD-SDI MV ProductionVIEW HD-SDI MV, Rear View with Feature Call-outs: ⑨ ① ⑧ ⑦ 18VDC ② ⑥ ③ ④ ⑤ 1. Power Input: Use only the 18 VDC, 2.78 A power supply provided with the ProductionVIEW HD-SDI MV. 2. External Reference Input on HD/SD-SDI connector: For connecting “house sync” to Program outputs when connecting ProductionVIEW HD-SDI MV to another switcher/mixer. Because the ProductionVIEW HDSDI MV is a seamless switcher, none of the inputs have to be in sync, only the outputs.
ProductionVIEW HD-SDI MV First Time Set-up with the ProductionVIEW HD-SDI MV: ProductionVIEW HD-SDI MV is designed to be exceptionally easy to use and operate right out of the box. All of the Vaddio standards for using video, power and control over Cat. 5 cabling are well documented and are in the manual and available free of charge from the Vaddio website. Getting Started: Connect all of the cameras, monitors and peripheral devices to ProductionVIEW HD-SDI MV.
ProductionVIEW HD-SDI MV Basic System Configuration: ProductionVIEW HD-SDI MV connected to one (1) Vaddio Quick-Connect™ HD-20 CCU System, TeleTouch 22” Touch Screen Controller and room projector. The TeleTouch Touch Screen Controller eliminates the need for individual preview monitors and the touch screen greatly simplifies overall console operation.
ProductionVIEW HD-SDI MV ProductionVIEW HD-SDI MV connected to four-HD-20 PTZ Cameras with EZIM HD-SDI Slot Cards, a TeleTouch 22” Touch Screen Controller, a standard LCD Monitor and a standard HD-SDI Monitor: Four (4) Vaddio HD-20 Cameras with optional EZIM HD-SDI Slot Cards Helicopter not included HD-SDI RS-232 HD-SDI RS-232 HD-SDI RS-232 HD-SDI RS-232 ProductionVIEW HD-SDI MV HD-SDI Program Out HDMI Program Out HD-SDI Output HD-SDI HDMI Output 1 HDMI Output 2 HDMI Note: LCD Monitor displays t
ProductionVIEW HD-SDI MV Operating the ProductionVIEW HD-SDI MV: Most of the console functions and controls are easy and intuitive. Over the next few pages there are details on how the different functions operate. Camera Controls: The controls that can be used to adjust a PTZ camera are highlighted in the diagram to the right (mechanical functions are in gray, and electronic in blue). See notes below for additional information.
ProductionVIEW HD-SDI MV Setting Single Bus or Dual Bus Multiviewer Mode: Clear Memory: Enter the Main Menu and scroll to System Menu. Enter System Menu and scroll to Clear Memory. Enter Clear Memory and select Start. Note: Clear Memory clears the camera preset memories and sets all parameters to default settings. Set Touch Screen Size: Enter System Menu and scroll to Touch Screen. Select either 22 Inch or 18.5 Inch.
ProductionVIEW HD-SDI MV FTB Speed: The speed at which the signal fades in and out can be adjusted through the internal menu of ProductionVIEW HD-SDI MV. Speed ranges from 0.1 to 4.0 seconds (01 to 40 in the menu). See the ProductionVIEW HD-SDI MV Menu Structure section of this manual for the location of the internal menu that adjusts FTB timing. Dual Mode FTB: Pressing and holding MIX/FTB in Dual Mode allows both the Preview and Program outputs to fade to black, just as it will in Single Mode operation.
ProductionVIEW HD-SDI MV PIP Display: To set up and display a Picture-In-Picture on the Program output, select the input that will be the “background” on the Program bus. Select the video input that will be the picture-in-picture, or in the “window” on the screen. In the example to the right, the background is Input 1 on the Program bus and Input 3 is the window on the Preview bus. Next, select the corner that the PIP window will show up in, using the P.I.P.
ProductionVIEW HD-SDI MV Using the Multiviewer and Control modes with the Optional TeleTouch™ HD Touch Screen LCD Monitors: Vaddio has the optional TeleTouch 22” and 18.5” Resistive Touch Technology, Full HD LCD Monitors available for use with the ProductionVIEW™ HD MV and ProductionVIEW HD-SDI MV Multiviewer Video Consoles. TeleTouch 18.
ProductionVIEW HD-SDI MV Optional TeleTouch LCD Monitor How the hardware and software work to provide a touch screen multiviewer. ➀ ➁ ➂ ➇ 1080p/60 ➃ ➄ 1080p/60 ➆ ➅ Details: 1) Program video output window with red tally border. 2) Preview video output window with green tally border. 3) Video window name and output resolutions listed under Program and Preview windows. 4) Up to 6 input windows, labeled INPUT 1 through INPUT 6, with input resolutions listed.
ProductionVIEW HD-SDI MV How to Create Presets and Video Thumbnails: To set up still video thumbnails of preset camera positions, touch and hold a standard video input window with a PTZ camera, for our example input window #2. The size of the widow will reduce to about ¼ its size (same size as the video thumbnail) and is ready to be positioned. With the ProductionVIEW HD-SDI MV’s joystick, position the camera where it can be easily recalled for later use.
ProductionVIEW HD-SDI MV ProductionVIEW HD-SDI MV Menu Structure The ProductionVIEW HD-SDI MV has an 8-line LCD that displays the system menus. The menus are traversed with the up/down arrows, select and cancel buttons. The menu structure is as follows: st 1 Screen ProductionVIEW HD-SDI MV V01.00.
ProductionVIEW HD-SDI MV >Multiviewer Output >Preview SDI 1080p/59.94Hz SDI 1080p/50Hz SDI 1080i/59.94Hz SDI 1080i/50Hz HDMI 1080p/59.94Hz HDMI 1080p/50Hz HDMI 1080i/59.
ProductionVIEW HD-SDI MV Preset Pan Speed >Select >01 – 24 (default is 18) Sets the Pan Speed on all cameras between camera presets (24 is fastest) (This parameter does not affect the Pan Speed or sensitivity of the Joystick) Preset Tilt Speed >Select >01 – 20 (default is 15) Sets Tilt Speed on all cameras between camera preset changes (20 is fastest) (This parameter does not affect the Tilt Speed on the Joystick) Preset Zoom Speed >Select >00 – 07 (default is 04) Sets Zoom Speed on all cameras between cam
ProductionVIEW HD-SDI MV Multiviewer >Select >On or Off Note: When activated, you must go to Touch Screen Menu and select either the 22” or 18.5” Vaddio TeleTouch Touch Screen.
ProductionVIEW HD-SDI MV >Preset Location >Local >6 InCam 6 Local In “Local” mode, the ProductionVIEW HD-SDI MV stores all 12 presets internally In “6 InCam 6 Local” mode, the presets 1 through 6 will be stored in the cameras. Presets 7 through 12 will be stored in the ProductionVIEW HD-SDI MV. Note: The “6 InCam 6 Local” mode allows for switching video sources when cameras are moving to preset locations.
ProductionVIEW HD-SDI MV >Touch Screen >22 Inch >18.5 Inch Note: Once you select the TeleTouch Touch Screen you are connecting to the ProductionVIEW HD-SDI MV, you must go to the Multiviewer Menu and select On to activate the Touch Screen Control. >Preview Position >Left >Right Note: Preview Position Left places the Preview Window to the left side of the multiviewer screen. Preview Position Right places the Preview Window to the Right side of the multiviewer screen.
ProductionVIEW HD-SDI MV ProductionVIEW HD-SDI MV Back Panel Connectors: 18VDC Power: 18 VDC, 2.78 A (5.5mm OD x 2.
ProductionVIEW HD-SDI MV General Specifications: Automatically Accepted Input Resolutions: INPUTS INPUTS 1 thru 5* HD-SDI & SDI 480i/29.97 576i/25 720p/25 720p/30 720p/50 720p/59.94 720p/60 1080i/59.94 fields/s 1080i/60 1080i/50fields/s 1080p/59.94 1080p/60 1080p/50 1080p/25 1080p/29.97 1080p/30 INPUT 6* RGBHV 640x480@60Hz 640x480@75Hz 800x600@60Hz 1024x768@60Hz 1024x768@75Hz 1280x768@60Hz 1280x1024@60Hz 1360x768@60Hz 1400x1050@60Hz 1600x1200@60Hz PROGRAM*** HD-SDI/SDI 525i/29.
ProductionVIEW HD-SDI MV General Specifications (continued): ProductionVIEW HD-SDI MV Part Numbers: Compatible Cameras: Video Formats Supported: Video Switcher: Video Transitions: Video Inputs: Preview or Multiviewer Output: 999-5655-000 (NTSC) 999-5655-001 (PAL) Vaddio, Panasonic, Sony & Canon (See Manual for Specific Models) NTSC and PAL 6 x 2 (or Two 6 x 1) Cross Fade, 9 Wipe options and Straight Cuts, Fade to Black Five (5 -BNC) One (1-DVI-I) One (1-BNC) Preview or Multiviewer: HD-SDI or SD-SDI Same
ProductionVIEW HD-SDI MV Appendix 1: Video and Control Pin-out Table for ProductionVIEW HD-SDI MV Camera Control Ports 1 through 6 - RS-232 on RJ-45 Connectors: PIN# 1) 2) 3) 4) 5) 6) 7) 8) Signal Unused Unused Unused Unused Unused GND TXD (to RXD of camera) RXD (from TXD of camera) 12345678 Appendix 2: RS-232 Control The ProductionVIEW HD-SDI MV has six (6) discrete camera control ports which eliminates the need for daisychaining control cabling.
ProductionVIEW HD-SDI MV API and Programming Language +--------------------------------------------------------------------------+ | Vaddio ProductionVIEW HD-SDI MV | +--------------------------------------------------------------------------+ | ? - This Menu | +------------------------ System Access -----------------------------------+ |Power x- Power(On/Off) |SysMode x- (Manual/Auto) | |ProgIn x- Program (1-6,7-LSG,8-PIP)|Preset x- Go to Preset(1-12) | |PrevIn x- Preview (1-6,7-LSG,8-PIP)|Store x- Store
ProductionVIEW HD-SDI MV Compliance testing was performed to the following regulations: FCC Part 15, Subpart B ICES-003, Issue 4: 2004 CISPR 22: 2009 European Standard EN 55103-1: 2009 European Standard EN 55103-2: 2009 EN 55022: 2006 + A1: 2007 (CISPR 22:2005/A1: 2005) EMC Directive 2004/108/EC Class A Class A Class A Class A Class A Class A Class A FCC Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15, S
ProductionVIEW HD-SDI MV Warranty Information: Hardware* Warranty: One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice of such defects during the warranty period, they will, at their option, repair or replace products that prove to be defective. Please see Vaddio’s Service Terms and Conditions at vaddio.com for specific details and policies.
ProductionVIEW HD-SDI MV Notes: ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev.
ProductionVIEW HD-SDI MV ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev.
ProductionVIEW HD-SDI MV Back Inside Cover - Blank ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev.
ProductionVIEW HD-SDI MV Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2014 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, ProductionVIEW, TeleTouch, Quick-Connect, ClearVIEW, WallVIEW, CeilingVIEW, and PowerRite are ProductionVIEW HD-SDI Manual - Document Number 342-0318 Rev. B Page 36 of 36 trademarks of Vaddio.
