Installation and Guide Cameras and Electronic Product for Integrators Vaddio™ WallVIEW™ CCU HD-18 HD-SDI High-Definition HD-18 PTZ Camera featuring the EZIM HD-SDI Slot Card and Quick-Connect CCU Model Number 999-6908-000 (North America) Model Number 999-6908-001 (International) Model Number 999-6908-000W (North America) Model Number 999-6908-001W (International) Arctic White Version EZIM HD-SDI Card for HD-18 Quick-Connect CCU for HD-18 ©2010 Vaddio - All Rights Reserved.
WallVIEW CCU HD-18 HD-SDI WallVIEW CCU HD-18 HD-SDI Overview Figure 1: Quick-Connect HD-18 CCU With the WallVIEW CCU HD-18 HD-SDI PTZ camera and CAT 5e cabling system, Vaddio delivers a solution that allows for easy installation and integration and ultimate flexibility for the most demanding of users. The camera is built around a 1.3 megapixel, 1/3” CCD with an 18x optical zoom lens, making it the ideal choice for a wide range of high definition video applications.
WallVIEW CCU HD-18 HD-SDI UNPACKING: Carefully remove the device and all of the parts from the packaging. Unpack and identify the following parts: • One (1) ClearVIEW HD-18 PTZ Camera • One (1) Quick-Connect CCU Interface for HD-18 • One (1) IR Remote Control • One (1) EZIM HD-SDI Slot Card for HD-18 • One (1) Wall Mount and Hardware • One (1) RJ-45 to DB-9 Adapter • One (1) Vaddio PowerRite 36 VDC, 2.
WallVIEW CCU HD-18 HD-SDI The Components (continued) Figure 3: WallVIEW HD-18 camera (back) 5 9 6 10 7 11 12 8 Rear of WallVIEW HD-18 5. 6. 7. 8. 9. 10. 11. 12. RS-232 In & IR Out – The RS-232 accepts modified VISCA™ protocol for camera control, as well as transmits IR signaling received by the IR receivers, which can be transmitted to third party devices. DIP Switch Settings – Settings for IR remote, baud rate, SD output format, image flip can be configured on these switches.
WallVIEW CCU HD-18 HD-SDI The Components (continued) • Quick-Connect CCU Front Panel Controls (left to right): Figure 4: Quick-Connect HD-18 CCU Front Panel Tally Light: The blue LED tally light on the front panel is tied to the tally contacts on the rear panel allowing the user to easily track which camera interface is being used in a multi-camera system by supplying a simple contact closure (i.e. from ProductionVIEW HD-SDI or Precision Camera Controller).
WallVIEW CCU HD-18 HD-SDI The Components (continued) Rear Panel Connections and Controls (Left to Right): Figure 5: Quick-Connect HD-18 CCU Rear Panel + G Power Supply Input: 36V 2.78 Amp power supply on a 5.5mm OD x 2.5mm ID connector. provided. Only use the power supply Power on RJ-45: Power is provided on a CAT 5e cable to EZIM HD-SDI Card. RS-232 IN on RJ-45: RS-232 Input from ProductionVIEW HD-SDI, Precision Camera Controller, or a third-party controller. Daisy Chain control is not supported.
WallVIEW CCU HD-18 HD-SDI The Components (continued) • EZIM HD-SDI Slot Card Using only the most advanced and leading edge components available today, the EZIM HD-SDI produces remarkable picture quality and is capable of 3Gb/s single link HD-SDI. Currently, the EZIM HD-SDI coupled with the HD-18 PTZ camera can output 1080p/60, has been tested and is compatible with the single link 3Gb/s inputs of the Vaddio ProductionVIEW HD-SDI Seamless Video Switcher and Camera Controller.
WallVIEW CCU HD-18 HD-SDI First Time Set-up with the WallVIEW CCU HD-18 HD-SDI: WallVIEW CCU HD-18 HD-SDI was designed to be exceptionally easy to use and operate. There is documentation at the back of the manual for pin-outs for all of the connectors on the WallVIEW CCU HD18 HD-SDI System. Getting Started: First, set up the HD/SD-SDI output resolution for the camera, baud rate and image flip.
WallVIEW CCU HD-18 HD-SDI Before Installing • Locate the camera mounting location paying close attention to camera viewing angles, lighting conditions, possible line of site obstructions, and checking for in-wall obstructions where the camera is to be mounted. Pick a mounting location to optimize the performance of the camera. • Pre-wire all cabling as required (see the wiring diagram example below).
WallVIEW CCU HD-18 HD-SDI • When the Slot Card is fully seated, tighten the retractable spring loaded captive screws (4). Do not force or cross tread the captive screws. Slowly tighten both of the screws at the same time to avoid any undesirable and/or dastardly threading incidents.
WallVIEW CCU HD-18 HD-SDI Slot Card Dimensions: Figure 12: 4.75” (120.65mm) 3.0” (76.2mm) 4.25” (107.95mm) 5.875” (149.23mm) HD-SDI/SDI Cable Distances Using the ProductionVIEW HD-SDI Console and the HD-18 HD-SDI Slot Card, expected HD-SDI/SDI cable distances are approximately: Resolutions: 720p 1080i 1080p/29.97/25 Hz 1080p** SMPTE STD SMPTE 292M SMPTE 292M Cable Distances* Max. Length: 754.543 ft. (230m) Max. Length: 754.543 ft. (230m) SMPTE 424M 480i 576i SMPTE 259M SMPTE 259M Max.
WallVIEW CCU HD-18 HD-SDI EZIM HD-SDI Slot Card Output Resolutions: The HD-SDI/SDI output of the Slot Card will be dependent on the output signal being fed into the slot card from the Vaddio HD-18 camera. The HD Video Resolutions are selected via the 16-position rotary switch on the HD-18 camera. A label has been placed on the bottom of the camera for reference. The HD-SDI and the YPbPr are concurrent outputs at the same resolution.
WallVIEW CCU HD-18 HD-SDI System Configuration Example 1: Sample configuration of a WallVIEW CCU HD-18 connected to ProductionVIEW™ HD-SDI, with power, video, control and tally cabling. Vaddio HD-18 with optional HD-SDI Card in camera HD-SDI Coax Cable *Quick-Connect CCU provides Power and Color Correction/Shading to the HD-18 Power CAT 5 RS-232 & Tally CAT 5 Cat. 5 up to 500’ (152.
WallVIEW CCU HD-18 HD-SDI System Configuration Example 2: HD-SDI System using two HD-18 Cameras with the HD-SDI Slot Cards installed. The HD-18’s are powered and color-corrected by the Quick-Connect CCU and controlled by the ProductionVIEW HD-SDI Seamless Switcher/Controller. In this case a PC is connected to a UXHD CrossPoint to convert the RGBHV format to HD-SDI and at the same time, the UXHD CrossPoint can convert one of the two HDSDI Program Outputs to use with an existing RGBHV or HD video projector.
WallVIEW CCU HD-18 HD-SDI Other Configurations: Simple Configuration - Local 12 VDC Power, Control from ProductionVIEW HD-SDI and HD-SDI Video from the Slot Card to ProductionVIEW HD-SDI.
WallVIEW CCU HD-18 HD-SDI General Specifications: WallVIEW CCU HD-18 HD-SDI Part Numbers WallVIEW CCU HD-18 HD-SDI WallVIEW CCU HD-18 HD-SDI WallVIEW CCU HD-18 HD-SDI WallVIEW CCU HD-18 HD-SDI 999-6908-000 - North America 999-6908-000W - North America (Arctic White Version) 999-6908-001 - International 999-6908-001W - International (Arctic White Version) • Vaddio ClearVIEW HD-18 * Image Device 1/3” CCD Picture Elements 1.3 Megapixels HD-SDI Signals HD: 1080p @ 60/50/30/25 Hz, 1080i @ 59.
WallVIEW CCU HD-18 HD-SDI Compliance and CE Declaration of Conformity - Vaddio HD-18 PTZ Camera FCC Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
WallVIEW CCU HD-18 HD-SDI Compliance and CE Declaration of Conformity - Vaddio EZIM HD-SDI Slot Card FCC Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15, Subpart B, of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
WallVIEW CCU HD-18 HD-SDI Compliance and CE Declaration of Conformity - Vaddio Quick-Connect CCU FCC Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
WallVIEW CCU HD-18 HD-SDI Warranty Information: Hardware* Warranty - One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice of such defects during the warranty period, they will, at their option, repair or replace products that prove to be defective.
WallVIEW CCU HD-18 HD-SDI Other General Information: Care and Cleaning • Do not attempt to take any of these products apart at any time. There are no user-serviceable components inside. • Do not spill liquids or liquid type substances onto the HD-SDI Slot Card, the CCU or in the HD-18 Camera. • Keep this device away from food or liquid or other immeasurably bad sticky or oily things.
WallVIEW CCU HD-18 HD-SDI Appendix 1: Video Pin-out Table for WallVIEW HD-18 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 YPbPr Pr Y Pb Pr GND Y GND Pb GND - NOTE: This output, on the back of the camera is still active, even with the EZIM HD-SDI slot card installed. Appendix 2: Camera Dimensions WallVIEW CCU HD-18 HD-SDI Manual 341-988 Rev.
WallVIEW CCU HD-18 HD-SDI Appendix 3: Communication Specification Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control 12345678 Pin # 1) 2) 3) 4) 5) 6) 7) 8) RJ-45 RS-232 and IR Out Pins Unused Unused IR Out (TTL level) (not used in CCU Config) IR Output (not used in CCU Config) IR Ground (not used in CCU Config) GND RXD (from TXD of control source) TXD (to RXD of control source) NOTE: The Vaddio ClearVIEW HD-18 Control Protocol is similar, but not
WallVIEW CCU HD-18 HD-SDI HD-18 Command List (2/2) Command Set V Command Command Packet CAM_Backlight Y Y Y Y Y Y Y Y Y Y Y Y Y N+ N+ Y Y Y Y Y Y Y Y Y Y On Off Reset Up Down Direct Reset Set Recall 81 01 04 33 02 FF 81 01 04 33 03 FF 81 01 04 02 00 FF 81 01 04 02 02 FF 81 01 04 02 03 FF 81 01 04 42 00 00 0p 0q FF 81 01 04 3F 00 0p FF 81 01 04 3F 01 0p FF 81 01 04 3F 02 0p FF 81 01 04 22 0p 0q 0r 0s FF 81 01 06 08 02 FF 81 01 06 08 03 FF 81 01 06 08 10 FF 81 01 7D 01 03 00 00 FF 81 01 7D 01 13 00 00
WallVIEW CCU HD-18 HD-SDI HD-18 Inquiry List (1/1) Inquiry Command V Command Command Packet Comments CAM_PowerInq Y 81 09 04 00 FF CAM_ZoomPosInq CAM_WBModeInq Y Y 81 09 04 47 FF 81 09 04 35 FF CAM_RGain CAM_BGain CAM_AEModeInq Y Y Y 81 09 04 43 FF 81 09 04 44 FF 81 09 04 39 FF CAM_Iris CAM_Gain CAM_BacklightModeInq Y Y Y 81 09 04 4B FF 81 09 04 4C FF 81 09 04 33 FF CAM_ApertureInq CAM_MemoryInq CAM_IDInq CAM_ReceiveInq Y Y Y Y 81 09 04 42 FF 81 09 04 3F FF 81 09 04 3F FF 81 09 06 08 FF
WallVIEW CCU HD-18 HD-SDI 9433 Science Center Drive, Minneapolis, MN 55428 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2010 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, ClearVIEW, ProductionVIEW, Quick-Connect, UXHD, WallVIEW, EZCamera, EZIM and PowerRite are registered trademarks of Vaddio.
